Data Sheet

4
DESIGN FEATURES
SPECIFICATIONS
T3VNA1500
Vector Network Analyzer Frequency Range 10 MHz – 1.5 GHz
Spectrum Analyzer Frequency Range 9 kHz – 1.5 GHz
Resolution Bandwidth 1 Hz – 1 MHz
Displayed Average Noise Level -156 dBm/Hz
Phase Noise <-98 dBc/Hz
Total Amplitude Accuracy < 1.2 dB
Tracking Generator 5 MHz – 1.5 GHz
Touch Screen Multi Touch, Mouse and Keyboard supported
Advanced Measurement CHP, ACPR, OBW, CNR, Harmonic, TOI, Monitor
Vector Network Analysis Vector S11, Vector S21
Distance to Fault VNA Timing Domain Analysis
Modulation Analysis AM, FM, ASK, FSK, MSK, PSK, QAM
EMI Test EMI Filter and Quasi-Peak Detector, Log Scale and Limit Line
Communication Interface LAN, USB Device, USB Host(USB-GPIB)
Remote Control Capability SCPI/Labview/IVI based on USB-TMC/VXI-11/Socket/Telnet
Remote Controller NI-MAX, Web Browser, File Explorer
Specicationsarevalidunderthefollowingconditions:
The instrument is within the calibration period, has been stored
between 0 and 50°C for at least 2 hours prior to use, and has
been powered on and warmed up for at least 40 minutes. The
specicationsincludethemeasurementuncertainty,unless
otherwise noted.
Specications: The T3VNA1500 is guaranteed to meet published
specicationswhenoperatingatroomtemperature(approximately
25°C), unless otherwise noted.
Typical: Performance deemed typical implies that 80 percent of the
measurement results will meet the typical published performance
with a 95
th
percentilecondencelevelatroomtemperature
(approximately 25°C). Typical performance is not warranted and
does not include measurement uncertainty.
Nominal: The expected performance or design attribute.