Data Sheet

ManualsBrandsTeledyne LeCroy ManualsLaboratory EquipmentTeledyne LeCroy T3VNA1500 Spectrum analyzer Tracking generator, Spectrum analyzer

T3VNA1500 Data Sheet

1.5 GHz Vector Network Analyzer

Broad Measurement Range

Frequency Range: 9 kHz to 1.5 GHz

Tools for Improved Debugging

●

Vector Network Analyzer, Spectrum Analyzer and

Distance To Fault modes.

More application coverage from a single instrument.

●

-156 dBm/Hz Displayed Average Noise Level (Typ.)

View and measure very small signals.

●

-98 dBc/Hz @ 10 kHz Offset Phase Noise

(1 GHz, Typ.)

Improved specication gives more accurate

measurement results.

●

Optional EMI Pre-compliance Test Kit

Optional Modulation Analysis Mode

Make EMI Receiver measurements to CISPR 16-1-1

Add Vector Signal Modulation Analysis

measurements.

●

Built-in switchable pre-amplier.

Integrated pre-amplier allows higher sensitivity

measurements.

●

10.1 inch (25.65 cm) color WVGA 1024 x 600 display.

Clear and flexible display aids ease of use.

●

USB Device, USB Host and LAN support.

Remote control your measurements.

Key Specications

Model T3VNA1500

Vector Network Analyzer Frequency Range 10 MHz to 1.5 GHz

Spectrum Analyzer Frequency Range 9 kHz to 1.5 GHz

Resolution Bandwidth 1 Hz to 1 MHz

Displayed Average Noise Level -156 dBm/Hz

Phase Noise < -98 dBc/Hz

Total Amplitude Accuracy < 1.2 dB

Summary of content (12 pages)

PAGE 1
T3VNA1500 Data Sheet 1.5 GHz Vector Network Analyzer Broad Measurement Range Frequency Range: 9 kHz to 1.5 GHz Tools for Improved Debugging Vector Network Analyzer, Spectrum Analyzer and Distance To Fault modes. More application coverage from a single instrument. -156 dBm/Hz Displayed Average Noise Level (Typ.) View and measure very small signals. -98 dBc/Hz @ 10 kHz Offset Phase Noise (1 GHz, Typ.) I mproved specification gives more accurate measurement results.
PAGE 2
PRODUCT OVERVIEW Teledyne Test Tools T3VNA1500 Vector Network Analyzer consists of a model with Vector Network Analysis frequency range from 10 MHz to 1.5 GHz and Spectrum Analysis frequency range from 9 kHz to 1.5 GHz. The small footprint and easy user interface is augmented by a high performance specification with many advanced measurement functions and capabilities. The high performance Vector Network Analysis capability is enhanced further by the full featured Spectrum Analysis capability.
PAGE 3
DESIGN FEATURES Vector Network Analyzer Mode 10 MHz to 1.
PAGE 4
DESIGN FEATURES Vector Network Analyzer Frequency Range Spectrum Analyzer Frequency Range Resolution Bandwidth Displayed Average Noise Level Phase Noise Total Amplitude Accuracy Tracking Generator Touch Screen Advanced Measurement Vector Network Analysis Distance to Fault Modulation Analysis EMI Test Communication Interface Remote Control Capability Remote Controller T3VNA1500 10 MHz – 1.5 GHz 9 kHz – 1.5 GHz 1 Hz – 1 MHz -156 dBm/Hz <-98 dBc/Hz < 1.2 dB 5 MHz – 1.
PAGE 5
SPECIFICATIONS Vector Network Analyzer Mode T3VNA1500 Stimulus and Measurement Frequency Range Measurement IFBW Port1 Stimulus Power Format Sweep Points Trace Marker Calibration Directivity of Calibration Dynamic Range Trace Noise Calibration Mechanical Calibration Kit Port Extensions System Z0 Velocity Factor 10 MHz – 1.5 GHz S11, S21 10 kHz -5 dBm (Nom.
PAGE 6
SPECIFICATIONS T3VNA1500 Sweep and Trigger Sweep time Sweep mode Sweep rule Trigger source External trigger 1 ms to 3200 s RBW = 100 Hz – 1 MHz, Sweep RBW = 1 Hz – 10 kHz, FFT Single, Continuous Free, Video, External 5 V TTL level, Rising edge/Falling edge Amplitude Accuracy and Range Specifications Amplitude and Level Measurement range DANL to +10 dBm, 100 kHz – 1 MHz, preamplifier off DANL to +20 dBm, 1 MHz – 1.
PAGE 7
SPECIFICATIONS T3VNA1500 Error and Accuracy Resolution bandwidth switching uncertainty Logarithmic resolution, relative to RBW = 10 kHz ± 0.2 dB (nom.) Input attenuation 20 °C to 30 °C, fc = 50 MHz, preamp off, relative to att = 20 dB switching uncertainty ± 0.5 dB Absolute amplitude accuracy 20 °C to 30 °C, fc = 50 MHz, RBW = VBW = 1 kHz, att = 20 dB, peak detector, 95 % reliability ±0.4 dB, input signal -20 dBm, Preamp off ±0.
PAGE 8
SPECIFICATIONS Analog Modulation Analysis (Option T3VNA-AMA) T3VNA1500 AM Modulation rate range Accuracy Modulation depth range Accuracy FM Modulation rate range Accuracy Frequency deviation Accuracy 20 Hz to 100 kHz 1 Hz (nom.) < 0.1 % modulation rate (nom.) 5 % to 95 % ±4 % (nom.) 20 Hz to 200 kHz 1 Hz (nom.) < 0.1 % modulation rate (nom.) 1 kHz to 400 kHz ±4 % (nom.
PAGE 9
SPECIFICATIONS Advanced Measurements T3VNA1500 Power Measurement CHP, Channel Power ACPR, Adjacent Channel Power Ratio OBW, Occupied Bandwidth T-Power, Time Domain Power CNR, Carrier Noise Ratio Non-Linear Measurement Harmonic measurement TOI, Third-Order Intercept Spectrum Monitor Measurement Spectrogram Channel Power, Power Spectral Density Main CH Power, Left channel power, Right channel power Occupied Bandwidth, Transmit Frequency Error Zero Span Integrated Power C/N, Noise Power Max Harmonic number 10
PAGE 10
SPECIFICATIONS External input and external output Front panel RF input, Port 2 panel TG output, Port 1 10 MHz reference output 10 MHz reference input External Trigger input Security 50 Ω, N-female Front 50 Ω, N-female Front A 10 MHz, >0 dBm, 50 Ω, BNC-female B 10 MHz, -5 dBm – +10 dBm, 50 Ω, BNC-female C 1 kΩ, 5 V TTL , BNC-female D Kensington Lock point Communication Interface USB Host Device LAN USB-A 2.0 + USB E USB-B 2.
PAGE 11
Ordering Information Product Description Product code Standard configurations EMI Options Modulation Analysis Options T3VNA1500 Vector Network Analyzer Vector Netwok Analyzer, 9 kHz – 1.5 GHz A Quick Start, A USB Cable, A Calibration Certificate, Power cord, Calibration Kit, Utility Kit EMI Measurement Kit: EMI Filter and Quasi Peak Detector Near Field Probe: H field probe sets (25 mm, 10 mm, 5 mm, 2 mm), 30 MHz – 3.
PAGE 12
ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.