Data Sheet

3
Key Benefi ts
Quality of multi-channels differential
pairs cables instantly revealed
Assuming cables are perfect is acommon mistake.
You make ameasurement that involves afast
edge or high bandwidth signal and something
doesn’t look quite right. In those situations, you
add abad cable to your list of “usual suspects”.
Unless you have verifi ed the quality of your
cables, there is always the possibility that even your premium cables may have some imperfections that can
cause measurement artifacts. TheT3SP-series TDR reveals immediately the quality of your multi-channels
differential pairs cables and connectors, identifying parts that are out of spec, due to damage or defects.
Thisdrammatically improves your productivity and increases the confi dence in your design and results.
Testing differential impedance for: USB, HDMI, Display Port,
Automotive Ethernet …
Ordering information
Product Description Product Code
Differential High-frequency DP4T/2:8 Multiplexer T3SP-D4MX-BUNDLE
Included with T3SP-D4MX-BUNDLE:
■
T3SP-D4MX Multiplexer Mainframe
■
1 x pair of phase matched cables (±2 ps), 8-inch, Channel Inputs
■
4 x pairs of phase matched and color-coded cables (black, white, yellow and red), 24-inch, Channel Outputs
■
2 m USB2.0 cable with ferrite
■
10 conductive protective caps 
■
Conformance Certifi cate
Standard warranty is one year (for warranty extension please contact Teledyne LeCroy Service)
Electrical Characteristics
Operating frequency 0 –10 GHz (–3 dB BW: 8 GHz)
RF max. power ratings 30 dBm (50 Ω load), 24 dBm
(open)
RF input voltage range (DC) ±6 V
RF input current range (DC) ±200 mA
Contact resistance (ON) 1.8 Ω (typ.), 3.5 Ω (max.)
Contact resistance (OFF) >1 GΩ (@ ±6 V)
Hardware switching time
(without software latency)
<100 μs
Switching time
(with software latency
*
)
<10 ms
Switching cycles (min.
operations, mechanical)
10
9
Switching cycles (min.
operations, electrical)
500·10
6
(hot switching,
10 dBm in 50 Ω)
*
Latency due to internal programming.
It can increase with high data traffi c on the USB port.
Power Requirements
Power supply voltage 5 V (via USB)
Power supply current < 12 mA
Electrostatic Discharge (ESD)
RF (in/out), human body model (HBM) 5 kV
Temperature Range and Humidity
Temperature 0–55 °C
Humidity 5 %–85 % (R.H.,
without condensation)
Dimension
With connectors 49 × 108 × 180 mm
Without connectors 49 × 108 × 165 mm