Datasheet

11
UART / RS232 Trigger
Condition Start, Stop, Data, Parity Error
Source (RX/TX) CH1 ~ CH4
Data format Hex
Limit Range =,>,<
Data Length 1 byte
Data Width 5bit,6bit,7bit,8bit
Parity Check None, Odd, Even
Stop Bit 1bit,1.5bit,2bit
Idle Level High, Low
Baud Rate (Selectable) 600/1200/2400/4800/9600/19200/38400/57600/115200bit/s
Baud Rate (Custom) 300 bit/s ~ 334000 bit/s
CAN Trigger
Type All, Remote, ID, ID + Data, Error
Source CH1 ~ CH4
ID STD (11 bit), EXT (29 bit)
Data format Hex
Data Length 1~2 byte
Baud Rate (Selectable) 5k/10k/20k/50k/100k/125k/250k/500k/800k/1Mbit/s
Baud Rate (Custom) 5kbit/s~1Mbit/s
LIN Trigger
Type Break, Frame ID, ID+Data, Error
Source CH1 ~ CH4
ID 1 byte
Data format Hex
Data Length 1 ~ 2 byte
Baud Rate (Selectable) 600/1200/2400/4800/9600/19200 bit/s
Baud Rate (Custom) 300 bit/s ~ 20 kbit/s
Serial Decoder (Optional)
No. of Decoder 2
IIC Decoder
Signal SCL, SDA
Address 7 bit, 10 bit
Threshold -4.5~4.5div
List 1 ~ 7 lines
SPI Decoder
Signal CLK, MISO, MOSI, CS
Edge Select Rising, Falling
Idle Level Low, High
Bit Order MSB, LSB
Threshold -4.5~4.5div
List 1 ~ 7 lines
UART / RS232 Decoder
Signal RX, TX
Data Width 5bit,6bit,7bit,8bit
Parity Check None, Odd, Even
Stop Bit 1bit,1.5bit,2bit
Idle Level Low, High
Threshold -4.5~4.5div
List 1 ~ 7 lines
CAN Decoder
Signal CAN_H, CAN_L
Source CAN_H,CAN_L,CAN_H-CAN_L
Threshold -4.5~4.5div
List 1 ~ 7 lines
LIN Decoder
LINSpecicationPackageRevision Ver1.3,Ver2.0
Threshold -4.5~4.5div
List 1 ~ 7 lines