Datasheet

9
FUNCTION & CHARACTERISTICS
Bode Plot
Power Analysis
The T3DSO2000A Bode Plot application can control the built-in
waveform generator or any T3AFG40-80-120 function generator
to make Bode Plot measurements by scanning the amplitude and
phase response over frequency of passive or active components
and circuits. This makes it possible to replace expensive network
analyzers in less demanding applications. The built-in waveform
generator allows Bode Plot measurements up to 50 MHz whereas
usingtheT3AFG120allowsBodePlotmeasurementsupto120MHz.
Thecongurationscreenallowscongurationofthereference
and measurement channels with up to three measurement
channelspossible.Congurationofthemeasurementfrequency
and amplitude, setting the number of measurement points, load,
variable level sweeps, channel gain, decade or linear frequency
mode, etc.
Themeasurementscreenallowsthesettingofvecommon
measurements: Upper cutoff frequency, lower cutoff frequency,
bandwidth, gain margin and phase margin, as well as having
user settable measurement cursors.
The T3DSO2000A Power Analysis application provides a full suite
of power measurements and analysis tools, thus improving the
efciencyofmeasurementinswitchingpowersuppliesandpower
device designs. The power analysis application can measure
Power Quality, Current Harmonics, Inrush Current, Switching Loss,
Slew Rate, Modulation, Output Riplle, Turn On/Turn Off, Transient
Response,PSRRandEfciency.Eachmeasurementhasahelp
screen showing a connection diagram with notes.