Datasheet

8
FUNCTION & CHARACTERISTICS
Complete Connectivity
Connectivity includes External Trigger Input, Pass/Fail and
Trigger Out, USB Device (USBTMC) and LAN for remote
control, and a Kensington Lock security point.
Built-in 50 MHz Function/ArbitraryWaveform
Generator as standard
The 50 MHz built-in function/arbitrary waveform
generator comprises 6 standard waveforms and
45arbitrarywaveforms.
Search and Navigate
TheT3DSO2000Acanndeventswithinanacquisition
recordorhistoryacquisitionbasedonuserspecied
trigger conditions. Navigate browses through Events
flagged by the Search, plays back history events or
continuously moves the delay position on long records
(useful in zoom view).
Serial Bus Trigger and Decode
Trigger and decode up to 2 common embedded and
automotive serial buses (I
2
C, SPI, UART, LIN and CAN)
simultaneously. Options are available to add decoding of
CAN FD, FlexRay, I
2
S and MIL-STD-1553B. Bus protocol
information can be quickly and intuitively displayed time
aligned with the waveform and in table format.
Mask Test Function
Themasktestfunctionenablesuserstodenetheir
own masks directly from a waveform or from the mask
editor capability. The masks can then be used for
Go / NoGotestingwithanyfailuresstoredashistory
waveforms or screen shots. The masks can be stored
in the T3DSO2000A for future use, so are not lost when
the T3DSO2000A is powered off, making it suitable for
long-term signal monitoring or automated production
line testing.
Built in mask editor