Datasheet

Automatic measurement function for more than 50
parameters as well as Measurement Statistics, Zoom,
Gating, Math, History and Reference functions
10 Math functions (FFT, addition, subtraction,
multiplication, division, integration, differential, square
root, average, Enhanced Resolution and formula editor)
2 Math operators allowing 2 math functions to be used
at the same time.
High Speed hardware based Pass/Fail function
Optional MSO, 16 digital channels. Record Length
up to 50 Mpts/Ch
50 MHz function/arbitrary waveform generator included
as standard. Built-in 6 waveform types (Sine, Square,
Ramp, Pulse, DC, Noise) and 45 Arbitrary waveforms
Bode Plot from 10 Hz to 50 MHz using the T3DSO2000A
50MHzfunction/arbitrarywaveformgenerator,or10Hz
Models and key Specication
Model T3DSO2104A T3DSO2204A T3DSO2354A T3DSO2502A
Bandwidth 100 MHz 200 MHz 350 MHz 500 MHz
SamplingRate (Max.) All models have two 2 GSa/s ADCs. When all channels are enabled,
eachchannelhasamaximumsamplerateof1GSa/s.
Whenasinglechannelperpairisactive,thatchannelhassample
rate of 2 GSa/s
The T3DSO2502A
has one 2 Gsa/s ADC
per channel in
2channel>350MHz
mode, and one
2Gsa/sADCper
pair of channels in
≤350MHzfour
channel mode.
Channels T3DSO2104A 4 + EXT, T3DSO2204A 4 + EXT, T3DSO2354A 4 + EXT,
T3DSO2502A≤350MHz:4+EXT,>350MHz:2+EXT
Memory Depth (Max.) 100 Mpts/Ch (not interleave mode);
200 Mpts/Ch (interleave mode)
Waveform Capture Rate (Max.) 120,000 wfm/s (normal mode), 500,000 wfm/s (sequence mode)
Trigger Type Edge,Slope,Pulse,Window,Runt,Interval,Dropout,Pattern,Video,Zone
Serial Trigger and decoder IIC, SPI, UART, CAN, LIN. Optional: CAN FD, FlexRay, I
2
S, MIL-STD-1553B
16 Digital Channels (MSO option) Maximum waveform capture rate up to 500 MSa/s, Record length up to 50 Mpts/Ch
Waveform Generator One channel, 50 MHz, sample rate of 125 MHz, wave length of 16 kpts
I/O USB Host, USB Device, LAN 100M, Pass/Fail, Trigger In/Out
Probe (Std) 1 for each Channel
Display 10.1􀀠inch􀀠Touch Screen TFT-LCD􀀠(1024 x 600)
3
to 120 MHz using the T3AFG120 arbitrary function
generator.
Power Analysis application included as standard,
measuring power quality, current harmonics, inrush
current, switching loss, slew rate, modulation, output
ripple,turnon / turnoff,transientresponse,PSRR,
efciency.
T3DSO2502A supports 2 channels at up to 500 MHz
and4channelsat≤350MHz
Large 10.1 inch capacitive touch screen TFT-LCD
display with 1024 x 600 resolution
Multiple interface types: USB Host, USB Device
(USB-TMC), LAN, Trigger In/Out
Supports SCPI remote control commands
Supports Multi-language display and embedded online
help