Datasheet

PRODUCT OVERVIEW
TheT3DSO2000Aseriesemploysanewgenerationof
high speed display technology that provides excellent
signalclarity,delityandperformance.Thesystemnoise
floor is also lower than similar products in the industry. It
comeswithaminimumverticalinputrangeof500µV/div,
an innovative digital trigger system with high sensitivity
andlowjitter,andawaveformcapturerateof500,000
waveforms/sec (sequence mode). The T3DSO2000A also
employsa256-levelintensitygradingdisplayfunction
andacolortemperaturedisplaymodewhichcomplement
the high speed update rate. Teledyne Test Tools latest
oscilloscope offering supports multiple powerful triggering
modes including serial bus triggering. IIC, SPI, UART,
CAN and LIN serial bus trigger and decode is included
T3DSO2104A: 4 Channel 100 MHz
T3DSO2204A: 4 Channel 200 MHz
T3DSO2354A: 4 Channel 350 MHz
T3DSO2502A: 2 Channel 500 MHz / 4 Channel 350 MHz
Key Features
●
100 MHz, 200 MHz, 350 MHz and 500 MHz bandwidth
models
●
Real-time sampling rate up to 2 Gsa/s
●
New generation of high speed display technology
›
Waveform capture rate up to 120,000 wfm/s
(normal mode), and 500,000 wfm/s (sequence
mode)
›
Supports 256-level intensity grading and color
display modes Record length up to 200 Mpts
›
Digital trigger system
●
Intelligent trigger: Edge, Slope, Pulse Width, Window,
Runt, Interval, Time out, Dropout, Pattern, Serial and
Video
●
Zonetrigger:Upto2zoneswithuserdenedIntersect/
Not Intersect events.
Teledyne Test Tools new T3DSO2000A Oscilloscopes feature two channel and four channel models with analog
bandwidth options from 100 MHz to 500 MHz. Each model offers a maximum sample rate of 2 GSa/s, and
amaximum memory depth of 200 Mpts in half channel mode. All models incorporates two 2 GSa/s ADCs and two
200 Mpts memory modules. When all channels are enabled, each channel has sample rate of 1 GSa/s and a standard
record length of 100 Mpts. When only a single channel per ADC is active, the maximum sample rate is 2 GSa/s and
the maximum record length is 200 Mpts. For ease-of-use, the most commonly used functions can be accessed
with its user-friendly front panel design.
as standard. There are low cost options for serial bus
decoding of CAN FD, FlexRay, I
2
S, and MIL-STD-1553B
bus types. The models also include History waveform
recording, and sequential triggering that enable extended
waveform recording and analysis, as well as a 50 MHz
function / arbitrarywaveformgenerator.Thereisalsoan
option to add 16 channel MSO capability (user upgradable
option).Thenewdigitaldesignalsoincludesahardware
co-processor that delivers measurements quickly and
accurately without slowing acquisition and front-panel
response. The features and performance of Teledyne
Test Tools new T3DSO2000A offers outstanding value
formoney.
2
●
Standard serial bus triggering and decoding, supports
protocols IIC, SPI, UART, CAN, LIN. Optionally CAN FD,
FlexRay, I
2
S, MIL-STD-1553B
●
Videotrigger,supportsHDTV
●
Low background noise with voltage scales from
500µV/divto10V/div
●
High performance10-bit mode with typically 100 MHz
bandwidth.
●
Segmented acquisition (Sequence) mode, divides the
maximum record length into multiple segments (up to
90,000), according to trigger conditions set by the user,
withaverysmalldeadtimesegmenttocapturethe
qualifying event.
●
History waveform record (History) function, maximum
recorded waveform length is 90,000 waveforms.