Datasheet
11
SPECIFICATIONS
Trigger System
Mode Auto, Normal, Single
Level Internal:±4.1divfromthecenterofthescreen
EXT: ±0.61V
EXT/5: ±3.05V
Holdoff Range By Time: 8 ns – 30 s (8 ns Step)
By Event: 1 – 10
8
Coupling AC,DC,LFRJ,HFRJ,NoiseRJ(CH1–CH4) | AC,DC,LFRJ,HFRJ,(EXT)
Coupling Frequency Response
(CH1 – CH4)
2)
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 20 Hz
LFRJ: Attenuates the frequency components below 1.2 MHz
HFRJ: Attenuates the frequency components above 600 kHz
Coupling Frequency Response
(EXT)
2)
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8 Hz
LFRJ: Attenuates the frequency components below 33 kHz
HFRJ:Attenuatesthefrequencycomponentsabove967kHz
Accuracy
2)
CH1–CH4:±0.2div
EXT:±0.3div
Sensitivity CH1–CH4:≤2mV/div±0.5div,>2mV/div±0.33div
EXT:200mVpp(DC–10MHz),300mVpp(10MHz–300MHz)
EXT/5:1Vpp(DC–10MHz),1.5Vpp(10MHz–300MHz)
Jitter CH1 – CH4 < 10 ps rms, 6 divisions pk-pk, 2 ns edge, EXT < 200 ps rms
Displacement Pre-Trigger:0–100 %memory
Delay-Trigger: 0 – 5,000 div
Zone Up to 2 zones, Source: CH1 – CH4, Property: Intersect / Not Intersect
Edge Trigger
Slope Rising, Falling, Rising & Falling
Source CH1 – CH4/EXT/(EXT/5)/AC Line/D0 – D15
Slope Trigger
Slope Rising, Falling
Limit Range ≤,≥,<>,><
Source CH1 – CH4
Time Range 2 ns – 20 s
Resolution 1 ns
Pulse Width Trigger
Polarity +wid , -wid
Limit Range ≤,≥,<>,><
Source CH1 – CH4 / D0 – D15
Pulse Width Range 2 ns – 4.2 s
Resolution 1 ns
Video Trigger
Signal Standard NTSC,PAL,720p/50,720p/60,1080p/50,1080p/60,1080i/50,1080i/60,Custom
Source CH1 – CH4
Sync Any, Select
Trigger condition Line, Field
Window Trigger
Window Type Absolute, Relative
Source CH1 – CH4
1)
Single-channel: one channel in CH1/CH2 (or CH3/CH4) is ON and another is OFF
Dual-channel: both channels in CH1/CH2 (or CH3/CH4) are ON
2)
TypicalValuereferstothetestedvalueunderspecicconditions.Itmightvarywiththeambienttemperatureorotherconditions