T3DSO2000A Data Sheet Oscilloscopes Debug with Confidence 100 MHz – 500 MHz Tools for Improved Debugging ● ● ● ● ● ● ● Long Capture – 100 Mpts/Ch and 200 Mpts interleaved. Capture more time and show more waveform detail. Math and Measure – 9 basic math functions plus FFT and 50+ automatic measurement parameters. Extract results from waveforms and measurements. Connectivity – USB for mass storage, printing and PC control, plus LAN for fast data transfer.
PRODUCT OVERVIEW T3DSO2104A: 4 Channel 100 MHz T3DSO2204A: 4 Channel 200 MHz T3DSO2354A: 4 Channel 350 MHz T3DSO2502A: 2 Channel 500 MHz / 4 Channel 350 MHz Teledyne Test Tools new T3DSO2000A Oscilloscopes feature two channel and four channel models with analog bandwidth options from 100 MHz to 500 MHz. Each model offers a maximum sample rate of 2 GSa/s, and a maximum memory depth of 200 Mpts in half channel mode. All models incorporates two 2 GSa/s ADCs and two 200 Mpts memory modules.
Models and key Specification ● ● ● ● ● ● ● Model T3DSO2104A T3DSO2204A T3DSO2354A T3DSO2502A Bandwidth 100 MHz 200 MHz 350 MHz 500 MHz SamplingRate (Max.) All models have two 2 GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 1 GSa/s. When a single channel per pair is active, that channel has sample rate of 2 GSa/s Channels T3DSO2104A 4 + EXT, T3DSO2204A 4 + EXT, T3DSO2354A 4 + EXT, T3DSO2502A ≤ 350 MHz: 4 + EXT, > 350 MHz: 2 + EXT Memory Depth (Max.
FUNCTION & CHARACTERISTICS 4 1 3 6 2 5 8 9 1 High Resolution 10.1-inch TFT- 5 Multi-functional controls for AWG, LCD touch screen display for clear images. Search, Navigate, History and Decode. 2 Horizontal controls of Timebase, 6 Individual color coded channels, Zoom, Roll and trigger position. 3 Advanced Triggering controls including Edge, Pulse, Interval, Window, Slope, DropOut, Runt and Pattern trigger types. 4 Easy to use Auto Setup, Run / Stop and Default Controls. 10.
FUNCTION & CHARACTERISTICS A Wide Range Of Trigger Functions A wide range of powerful triggering functions including Edge, Slope, Pulse, Video, Window, Runt, Interval, Dropout, Pattern, Serial, etc, allows users to debug complex h ardware issues with ease. Powerful User Set Zone Trigger Extends Trigger Capability Record Length of up to 200 Mpts The record length of up to 200 Mpts (interleaved) or up to 100 Mpts (non-interleaved) allows use of a higher sampling rate to capture more signal detail.
FUNCTION & CHARACTERISTICS Sequence Mode Eres Mode Before Eres After Eres Segmented memory mode can store up to 90,000 waveforms into memory segments for capturing fast pulses in quick succession. Combine SequenceMode with advanced triggers to isolate rare events. All the segments can be play back using the History function.
FUNCTION & CHARACTERISTICS High Performance Front End Flat Frequency Response T3DSO2502A: At 500 MHz bandwidth the input noise floor is only 80 uVrms, and FFT Peaks are typically < -105 dBV. T3DSO2502A at 2 Gsa/s shows exceptionally flat frequency response up to its maximum 500 MHz bandwidth. Measurements of all relevant Parameters with Statistics Parameter measurements includes 4 categories: Vertical, Horizontal, Miscellaneous and Channel Delay providing a total of 50+ different types of measurements.
FUNCTION & CHARACTERISTICS Serial Bus Trigger and Decode Complete Connectivity Trigger and decode up to 2 common embedded and automotive serial buses (I2C, SPI, UART, LIN and CAN) simultaneously. Options are available to add decoding of CAN FD, FlexRay, I2S and MIL-STD-1553B. Bus protocol information can be quickly and intuitively displayed time aligned with the waveform and in table format.
FUNCTION & CHARACTERISTICS Bode Plot The T3DSO2000A Bode Plot application can control the built-in waveform generator or any T3AFG40-80-120 function generator to make Bode Plot measurements by scanning the amplitude and phase response over frequency of passive or active components and circuits. This makes it possible to replace expensive network analyzers in less demanding applications.
SPECIFICATIONS All specifications are not guaranteed unless the following conditions are met: ● The oscilloscope calibration period is valid ● The oscilloscope has been working continuously for at least 30 minutes at the specified temperature (18 – 28 ) Acquire System Sampling Rate Memory Depth Peak Detect Average Eres Interpolation 2 GSa/s (single-channel 1) ), 1 GSa/s (dual-channel) 200 Mpts (single-channel), 100 Mpts (dual-channel) 1 ns Averages: 4, 16, 32, 64, 128, 256, 512, 1024 Enhance bits: 0.
SPECIFICATIONS Trigger System Mode Level Holdoff Range Coupling Coupling Frequency Response (CH1 – CH4) 2) Coupling Frequency Response (EXT) 2) Accuracy 2) Sensitivity Jitter Displacement Zone Auto, Normal, Single Internal: ± 4.1 div from the center of the screen EXT: ± 0.61 V EXT/5: ± 3.
SPECIFICATIONS Interval Trigger Slope Limit Range Source Time Range Resolution Rising, Falling ≤, ≥, < >, > < CH1 – CH4 / D0 – D15 2 ns – 20 s 1 ns Dropout Trigger Timeout Type Source Slope Time Range Resolution Edge, State CH1 – CH4 / D0 – D15 Rising, Falling 2 ns – 20 s 1 ns Runt Trigger Polarity Limit Range Source Time Range Resolution +wid , -wid ≤, ≥, < >, > < CH1 – CH4 2 ns – 20 s 1 ns Pattern Trigger Pattern Setting Logic Source Limit Range Time Range Resolution Low, High, Don't Care AND, OR,
SPECIFICATIONS UART Trigger Condition Source (RX/TX) Data format Limit Range Data Length Data Width Parity Check Stop Bit Idle Level Baud Rate (Selectable) Baud Rate (Custom) CAN Trigger Type Source ID Data format Data Length Baud Rate (Selectable) Baud Rate (Custom) LIN Trigger Type Source ID Data format Data Length Baud Rate (Selectable) Baud Rate (Custom) Start, Stop, Data, Parity Error CH1 – CH4 / D0 – D15 Hex =, >, < 1 byte 5 bit, 6 bit, 7 bit, 8 bit None, Odd, Even 1 bit, 1.
SPECIFICATIONS CAN Decoder Signal Source Decoded Frames (Max.) LIN Decoder LIN Specification Package Revision Baud Rate (Selectable) Decoded Frames (Max.) CAN_H, CAN_L CH1 – CH4 / D0 – D15 2,000 Ver1.3, Ver2.0 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, custom 3,000 Serial Decoder (Optional) CAN FD Source Nominal Baud Rate Data Baud Rate Decoded Frames (Max.) FlexRay Source Data Baud Rate Decoded Frames (Max.) I2S Signal Audio Variant Start Bits Baud Rate Decoded Frames (Max.
SPECIFICATIONS Horizontal (Time) Delay Miscellaneous Cursors Statistics Counter Period Freq Time@max Time@min +Width -Width 10 – 90 % Rise 90 – 10 % Fall 20 – 80 % Rise 80 – 20 % Fall +Bwidth -Bwidth +Duty -Duty Delay T@M CCJ Phase FRFR Period for every cycle in waveform at the 50 % level, and positive slope Frequency for every cycle in waveform at the 50 % level, and positive slope Time of maximum value Time of minimum value Width measured at 50 % level and positive slope Wid
SPECIFICATIONS Math Number of Math Operators Source Operation FFT 2 CH1 – CH4, Z1 – Z4, F1, F2 +, -, *, /, FFT, d/dt, ∫dt, square root, Formula Editor Length: 2 Mpts, 1 Mpts, 512 kpts, 256 kpts, 128 kpts, 64 kpts, 32 kpts, 16 kpts, 8 kpts, 4 kpts, 2 kpts Window: Rectangular, Blackman, Hanning, Hamming, Flattop Display: Full Screen, Split, Exclusive Mode: Normal, Max hold, Average Tools: Peaks, Markers Analysis Search Source Mode Copy setting Navigate Type Mask Test Source Mask creating Mask test speed St
SPECIFICATIONS Sine Frequency Offset Accuracy (10 kHz) Amplitude Flatness (Compared to 10 kHz, 5 Vpp) SFDR Harmonic Distorsion 1 μHz – 50 MHz ± (1 % * offset setting value + 3 mVpp) ± 0.3 dB ≤ 25 MHz ± 0.
SPECIFICATIONS I/O Standard USB 2.0 Host x2, USB 2.0 Device, LAN 100 M, Pass/Fail Out 3.3 V TTL, Trigger Out 3.3 V LVCMOS, EXT Trigger ≤ 1.5 Vrms, EXT/5 Trigger ≤ 7.5 Vrms Display Display Type Resolution Contrast Backlight Range 10.
ORDERING INFORMATION T3DSO2000 Probes Probe type Model Passive T3PP300 300 MHz bandwidth, 10 MΩ 10X Probe 1 supplied per channel. Replacement probe for the T3DSO2104A and T3DSO2204A Oscilloscopes. T3PP350A 350 MHz bandwidth, 10 MΩ 10X Probe 1 supplied per channel. Replacement probe for the T3DSO2354A Oscilloscope. PP020-1 500 MHz bandwidth, 10 MΩ 10X Probe 1 supplied per channel. Replacement probe for the T3DSO2502A Oscilloscope. Logic Probe T3DSO2000-LS 16 Channel Logic Probe.
ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
