Data Sheet

PRODUCT OVERVIEW
The T3DSO1000 series employs a new generation of high
speed display technology that provides excellent signal
clarity,  delity and performance. The system noise floor is
also lower than similar products in the industry. It comes
with a minimum vertical input range of 500 uV/div, an
innovative digital trigger system with high sensitivity and
low jitter, and a waveform capture rate of 400,000 frames/
sec (sequence mode). The T3DSO1000 also employs
a256-level intensity grading display function and a color
temperature display mode not found in other models in
this class. Teledyne Test Tools latest oscilloscope offering
supports multiple powerful triggering modes including
serial bus triggering. Serial bus decoding for IIC, SPI, UART,
CAN, LIN bus types is included. The models also include
History waveform recording, and sequential triggering
that enable extended waveform recording and analysis.
T3DSO1102: 2 Channel 100 MHz
T3DSO1104: 4 Channel 100 MHz
T3DSO1204: 4 Channel 200 MHz
Key Features
●
100 MHz, 200 MHz bandwidth models
●
Two channel series have one 1 GSa/s ADC, four
channel series have two 1 GSa/s ADCs. When all
channels are enabled, each channel has a maximum
sample rate of 500 MSa/s. When a single channel
per ADC is active, it has sample rate of 1 GSa/s
●
The newest generation of high speed display
technology
›
Waveform capture rate up to 100,000 wfm/s
(normal mode), and 400,000 wfm/s (sequence
mode)
›
Supports 256-level intensity grading and color
display modes Record length up to 14 Mpts
›
Digital trigger system
Teledyne Test Tools new T3DSO1000 Oscilloscopes feature two channel and four channel models. The two channel
model is available with 100 MHz analog bandwidth, a single ADC with a 1 GSa/s maximum sample rate, and a single
memory module with 14 Mpts of sample memory. The four channel scope is available in 100 and 200MHz models
and incorporates two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels are enabled, each channel
has sample rate of 500 MSa/s and a standard record length of 7 Mpts. When only a single channel per ADC is active,
the maximum sample rate is 1 GSa/s and the maximum record length is 14 Mpts.
For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.
Another powerful addition is the new 1millionpoint
FFT math function that gives the T3DSO1000 very high
frequency resolution when observing signal spectra. The
new digital design also includes a hardware co-processor
that delivers measurements quickly and accurately
without slowing acquisition and front-panel response.
The features and performance of Teledyne Test Tools new
T3DSO1000 cannot be matched in this price class.
The four channel series includes even more functions,
including: searching and navigating, on-screen Bode plot,
16 digital channels (Option), an external USB powered
25MHz AWG module (Option), a USB WIFI adapter
(Option), and an embedded application that allows remote
control via web browser.
2
●
Intelligent trigger: Edge, Slope, Pulse Width, Window,
Runt, Interval, Time out (Dropout), Pattern
●
Serial bus triggering and decoding (Standard), supports
protocols IIC, SPI, UART, RS232, CAN, LIN
●
Video trigger, supports HDTV
●
Low background noise with voltage scales from
500μV/div to 10 V/div
●
10 types of one-button shortcuts, supports Auto Setup,
Default, Cursors, Measure, Roll, History, Display/Persist,
Clear Sweep, Zoom and Print Segmented acquisition
(Sequence) mode, divides the maximum record length
into multiple segments (up to 80,000), according to
trigger conditions set by the user, with a very small dead
time segment to capture the qualifying event.
●
History waveform record (History) function, maximum
recorded waveform length is 80,000 frames.