T3DSO1000 / T3DSO1000A Data Sheet Oscilloscopes Debug with Confidence 100 MHz – 350 MHz Tools for Improved Debugging ● ● ● ● ● ● Long Capture – Up to 28 Mpts interleaved. Capture more time and show more waveform detail. Math and Measure – 7 basic math functions plus FFT and 38 automatic measurement parameters. Extract results from waveforms and measurements. Connectivity – USB for mass storage, printing and PC control, plus LAN for fast data transfer.
PRODUCT OVERVIEW T3DSO1102: T3DSO1104: T3DSO1202A: T3DSO1204: T3DSO1302A: 2 Channel 100 MHz 4 Channel 100 MHz 2 Channel 200 MHz 4 Channel 200 MHz 2 Channel 350 MHz Teledyne Test Tools new T3DSO1000 Oscilloscopes feature two channel and four channel models. The two channel models are available with 100 MHz, 200 MHz and 350 MHz analog bandwidths, a single ADC with up to 2 GSa/s maximum sample rate, and memory up to 28 Mpts.
Models and key Specification Model T3DSO1102 T3DSO1104 T3DSO1204 T3DSO1202A T3DSO1302A Bandwidth 100 MHz 200 MHz 200 MHz 350 MHz SamplingRate (Max.) Two channel series have a single 1 GSa/s ADC, four channel series have two 1 GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s.
FUNCTION & CHARACTERISTICS 7 inch TFT-LCD display and 10 one-button menus When all channels are enabled, each channel has a maximum sample rate of up to 1 GSa/s (depending on the model) When a single channel per pair is active, that channel has sample rate of up to 2 GSa/s (depending on the model) Front panel of T3DSO1104, T3DSO1202A, T3DSO1204, T3DSO1302A Front panel of T3DSO1102 ● ● ● 7-inch TFT-LCD display with 800 * 480 resolution Most commonly used functions are accessible using 10 different one-b
256-Level Intensity Grading and Color Temperature Display History Waveforms (History) Mode and Segmented Acquisition (Sequence) New display technology provides for fast refresh rates. The resulting intensity-graded trace is brighter for events that occur with more frequency and dims when the events occur with less frequency. Playback the latest triggered events using the history function.
FUNCTION & CHARACTERISTICS 1 M points FFT 16 Digital Channels/MSO (Option not available on the T3DSO1102) The math co-processor enables FFT analysis of incoming signals using up to 1 M samples per waveform. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs.
Bode Plot (not available on the T3DSO1102) USB 25 MHz AWG Module (Option not available on the T3DSO1102) The T3DSO1000 series supports an optional USB 25 MHz function/arbitrary waveform generator that is operated from the USB host connection. Functions include Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in waveforms. The arbitrary waveforms can be accessed and edited by the Teledyne Test Tools PC software. Option not available for the T3DSO1102.
SPECIFICATIONS Model T3DSO1102, T3DSO1104, T3DSO1204 T3DSO1202A, T3DSO1302A 1 GSa/s (single channel/pair), 500 MSa/s (two channels/pair) Max 14 Mpts/Ch (single channel/pair), 7 Mpts/Ch (two channels/pair) 2 nsec (Four channel series) 4 nsec (Two channel series) Averages: 4, 16, 32, 64, 128, 256, 512, 1024 Enhance bits: 0.5, 1.5, 2, 2.5, 3; Selectable Sin(x)/x, Linear 2 GSa/s (single channel), 1 GSa/s (two channels) Max 28 Mpts/Ch (single channel), 14 Mpts/Ch (two channels) 1 nsec 2+EXT Max.
Model T3DSO1102, T3DSO1104, T3DSO1204 T3DSO1202A, T3DSO1302A Trigger System Trigger Mode Trigger Level Holdoff Range Trigger Coupling Coupling Frequency Response Coupling Frequency Response (EXT) Trigger Accuracy (Typical) Trigger Sensitivity Trigger Jitter Trigger Displacement Auto, Normal, Single Internal: ± 4.5 div from the center of the screen EXT: ± 0.6 V (Two channel series) EXT/5: ± 3 V (Two channel series) 80 ns – 1.
SPECIFICATIONS Window Trigger Window Type Source Absolute, Relative All channels Interval Trigger Slope Limit Range Source Time Range Resolution Rising, Falling <,>,<>,>< All channels 2 ns ~ 4.2 s 1 ns Dropout Trigger Timeout Type Source Slope Time Range Resolution Edge, State All channels Rising, Falling 2 ns ~ 4.2 s 1 ns Runt Trigger Polarity Limit Range Source Time Range Resolution +wid , -wid <,>,<>,>< All channels 2 ns ~ 4.
UART / RS232 Trigger Condition Source (RX/TX) Data format Limit Range Data Length Data Width Parity Check Stop Bit Idle Level Baud (Selectable) (Custom) CAN Trigger Condition Source ID Data Format Data Length Baud Rate (Selectable) LIN Trigger Condition Source ID Data Format Data Length Baud Rate (Selectable) Baud Rate (Custom) Start, Stop, Data, Parity Error All channels Hex =, >, < 1 byte 5 bit, 6 bit, 7 bit, 8 bit None, Odd, Even 1 bit, 1.
SPECIFICATIONS Measurement Source Number of Measurements Measurement Range Measurement Parameters (38 Types) Vertical (Voltage) Horizontal( Time) Delay Cursors Statistics Counter 12 All channels, All channels in Zoom, Math, All References, History Display 5 measurements at the same time Screen region, Gate region Max Highest value in input waveform Min Lowest value in input waveform Pk-Pk Difference between maximum and minimum data values Ampl Difference between top and base in a bimodal signal, or b
Math Function Operation FFT window FFT display Number of Decoders + , - , * , / , FFT , d/dt , ∫dt , √ Rectangular, Blackman, Hanning, Hamming, Flattop Full Screen, Split, Exclusive 2 USB AWG Module (Not available on the T3DSO1102) Channel Max. Output Frequency Sampling Rate Frequency Resolution Frequency Accuracy Vertical Resolution AmplitudeRange Waveform Type Output impedance Protection 1 25 MHz 125 MSa/s 1 μHz ± 50 ppm 14-bits -1.5 ~ +1.
SPECIFICATIONS Digital Channels (Not available on the T3DSO1102) No. of Channels Max. Sampling Rate Memory Depth Min. Detectable Pulse Width Level Group Level Range Logic Type Skew[2] 16 1 GSa/s 14 Mpts/CH 4 ns D0~D7, D8~D15 -8 V ~ 8 V TTL, CMOS, LVCMOS3.3, LVCMOS2.5, custom D0~D15: ±1 sampling interval Analog To Digital: ± (1 sampling interval +1 ns) I/O Standard Pass/Fail USB Host, USB Device, LAN, Pass/Fail, Trigger Out 3.
Probes and Accessories Probe Model Passive Probes (T3DSO1102, T3DSO1104, T3DSO1202A, T3DSO1204) T3PP300 Picture Passive Probe, Bandwidth: 300 MHz Description Passive Probes (T3DSO1302A) T3PP350 Passive Probe, Bandwidth: 350 MHz USB AWG Module T3DSO1000FGMOD Output Sine, Square, Ramp, pulse, Noise, DC and 45 built-in waveforms.
ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
