Datasheet

ManualsBrandsTeledyne LeCroy ManualsMultimetersTeledyne LeCroy T3DMM5-5 Bench multimeter Digital Graphics display Display (counts): 240000

T3DMM5-5 Data Sheet

5.5 Digit Digital Multimeter

Broad Measurement Range

DC: 1000 Volts

AC: 750 Volts

Current: 10A

Tools for Improved Debugging



Wide range of measurements – DC/AC voltage and

Current, Resistance, Capacitance, Frequency, Period,

Temperature, and more.

More application coverage from a single Digital

multimeter.



True-RMS measurements – All AC Voltage and

Current ranges give True-RMS readings.

Excellent accuracy regardless of the waveform shape.



Low level measurement, high sensitivity ranges –

Voltage ranges as low as 200 mV full scale, DC Current

200 µA, AC Current 20 mA full scale.

High sensitivity ranges give greater accuracy of

small signal measurements.



Advanced measurement features – Min, Max,

Average, Standard Deviation dBm/dB, Pass/fail,

Histogram, Trend, Relative measurements.

Advanced features for today’s measurement needs.



Built-in cold terminal thermocouple compensation –

4.3 inch (10.92 cm) color TFT-LCD 480 x 272 display.

Accurate Temperature measurements.



USB Device, USB Host and LAN support

Remote control your measurements.

Key Specications

DC Voltage 200 mV to 1000 V

DC Current 200 µA to 10 A

True RMS AC Voltage 200 mV to 750 V

True RMS AC Current 20 mA to 10 A

2/4 Wire Resistance 200 Ohms to 100 MOhms

Connectivity USB Device, LAN

Remote Control SCPI, LabView Driver

Summary of content (10 pages)

PAGE 1
T3DMM5-5 Data Sheet 5.5 Digit Digital Multimeter Broad Measurement Range DC: 1000 Volts AC: 750 Volts Current: 10A Tools for Improved Debugging ●● ●● ●● ●● ●● ●● Wide range of measurements – DC/AC voltage and Current, Resistance, Capacitance, Frequency, Period, Temperature, and more. ore application coverage from a single Digital M multimeter. True-RMS measurements – All AC Voltage and Current ranges give True-RMS readings. Excellent accuracy regardless of the waveform shape.
PAGE 2
PRODUCT OVERVIEW Teledyne Test Tools T3DMM5-5 is a 5½ digit digital multimeter incorporating the latest 4.3 inch (10.92cm) dualdisplay technology which can be configured to show data histograms, Data fluctuation Trends, Bar Graph, Statistics or the traditional Number mode, all in an easy to use interface.
PAGE 3
SPECIAL FEATURES Dual Display Bar Chart Statistics Histogram Trend Chart Hold Measurement dBm Hold Measurement Rear Panel Interfaces 3
PAGE 4
SPECIFICATIONS DC Characteristic Function DC Voltage DC Current Resistance 3) Diode Test Continuity Test Accuracy ± (% of Reading + % of Range) 1) Range 2) 200 mV 2V 20 V 200 V 1000 V 4) 200 μA 2 mA 20 mA 200 mA 2A 10 A5) 200 Ω 2 KΩ 20 KΩ 200 KΩ 2 MΩ 10 MΩ 100 MΩ 2.0 V6) 4V 2000 Ω Test current or Load voltage 1 Year 23 °C ± 5°C < 8 mV < 80 mV < 0.05 V < 0.5 V < 0.1 V < 0.3 V 1 mA 1 mA 100 μA 10 μA 1 μA 200 nA 200 nA || 10 MΩ 1 mA 100 μA 1 mA 0.015 + 0.004 0.015 + 0.003 0.015 + 0.004 0.015 + 0.
PAGE 5
SPECIFICATIONS AC Characteristic Function Accuracy ± (% of Reading + % of Range) 1) Range 2) 200 mV 2V True-RMS AC Voltage 3) 20 V 200 V 750 V 20 mA 200 mA True-RMS AC Current 4) 2A 10 A 5) Frequency Range 1 Year 23 °C ± 5°C 20 Hz – 45 Hz 45 Hz – 20 KHz 20 KHz – 50 KHz 50 KHz –100 KHz 20 Hz – 45 Hz 45 Hz – 20 KHz 20 KHz – 50 KHz 50 KHz –100 KHz 20 Hz – 45 Hz 45 Hz – 20 KHz 20 KHz – 50 KHz 50 KHz –100 KHz 20 Hz – 45 Hz 45 Hz – 20 KHz 20 KHz – 50 KHz 50 KHz –100 KHz 20 Hz – 45 Hz 45 Hz – 20 KHz
PAGE 6
SPECIFICATIONS Frequency and Period Characteristic Function Frequency/Period Accuracy ± (% of Reading + % of Range) 1) Range Frequency Range 1 Year 23 °C ± 5°C 200 mV ~ 750 V 2) 20 Hz – 2 KHz 2 KHz – 20 KHz 20 KHz – 200 KHz 200 KHz –1 MHz 0.01 + 0.003 0.01 + 0.003 0.01 + 0.003 0.01 + 0.006 Temperature coefficient 0 °C ~ 18 °C 28 °C ~ 50 °C 0.002 + 0.001 0.002 + 0.001 0.002 + 0.001 0.002 + 0.002 Remarks: 1) Specifications are for 0.5 Hour warm-up.
PAGE 7
MEASURING METHOD AND OTHER CHARACTERISTICS DC Voltage Input Resistance Input Bias Current Input Protection CMRR NMRR 200 mV and 2 V Range 10 MΩ or > 10 GΩ selectable 20 V, 200 V and 1000 V Range 10 MΩ ± 2 % < 90 pA, 25 °C 1000 V on all ranges 120 dB (For the 1 KΩ unbalanced resistance in LO lead, max ± 500 VDC) 60 dB at “slow” measurement rate 20 dB is added if the “AC” filter is open (disconnected).
PAGE 8
MEASURING METHOD AND OTHER CHARACTERISTICS Temperature Measuring Measurement Method Support for TC and RTD types of sensor Trigger and Memory Samples/Trigger Trigger Delay External Trigger Input VMC 1 ~ 10000 6 ms ~ 10000 ms optional Input Level TTL compatible (High level when left input terminal is hanging in the air) Trigger Condition Rising and Falling selectable Input Impendance ≥ 20 KΩ//400 pF, DC-coupled Min Pulse 500 us Level TTL compatible Output Polarity Positive and negative optional Output
PAGE 9
Ordering information Product Name Model Standard Accessories Teledyne Test Tools T3DMM5-5 Digital Multimeter T3DMM5-5 5.
PAGE 10
ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.