Data Sheet

8
Temperature Measuring
Measurement Method Support for TC and RTD types of sensor
Trigger and Memory
Samples/Trigger 1 ~ 10000
Trigger Delay 6 ms ~ 10000 ms optional
External Trigger Input
Input Level TTL compatible (High level when left input terminal is
Disconnected
Trigger Condition Rising and Falling selectable
Input Impedance ≥ 20 KΩ//400 pF, DC-coupled
VMC
Level TTL compatible
Output Polarity Straight and negative optional
Output Impedance 200 Ω, typical
History Records
Volatile Memory 10 K reading of history records
Nonvolatile Memory 1 Gb Nand Flash, Mass storage conguration for les and data les, Support U-disk external
storage
Math Functions
Min/Max/Average, dBm, dB, Pass/Fail, Relative, Standard deviation, Hold, histogram, Trend chart, Bar chart
General Specications
Power Supply
AC 100 V ~ 120 V 45 Hz ~ 66 Hz
AC 200 V ~ 240 V 45 Hz ~ 66 Hz
Consumption 20 VA max
Mechanism
Dimension 293.75 mm × 260.27 mm × 107.21 mm
Weight 3.76 Kg
Other Characteristics
Display Screen 4.3” TFT-LCD with aresolution of 480*272
Operating Environment
Full accuracy from 0°C to 50°C, 80 % RH and 40°C, non condensing
Storage Temperature: -20°C -70°C
Shock and Vibration: conforming to MIL-T-28800E, , 5 level (only for sine)
Height above sea level: up to 3000 meters
electromagnetic compatibility Conforming to EMC (2004/108/EC) and EN 61326-1:2013
Safety Conforming to EN61010-1:2010 and low voltage instructions (2006/95/EC)
Remote Interface 10/100 Mbit LAN, USB2.0 Full Speed Device and Host
Programmer Language Standard SCPI, compatible with commands of main stream multimeters
Warm Up Time 30 minutes
MEASURING METHOD AND OTHER CHARACTERISTICS