Data Sheet

4
SPECIFICATIONS
Function Range
2)
Test current or
Load voltage
Resolution Accuracy (one year;
23°C ± 5°C)
DC Voltage
600 mV 0.01 mV 0.01 + 5
6 V 0.0001 V 0.01 + 6
60 V 0.001 V 0.02 + 4
600 V 0.01 V 0.02 + 6
1000 V
4)
0.1 V 0.02 + 6
DC Current
600 μA < 33 mV 0.01 μA 0.05 + 3
6 mA < 330 mV 0.0001 mA 0.05 + 3
60 mA < 0.05 V 0.001 mA 0.05 + 3
600 mA < 0.5 V 0.01 mA 0.12 + 6
6 A < 0.33 V 0.0001 A 0.20 + 5
10 A
5)
< 0.6 V 0.001 A 0.25 + 4
Resistance
3)
600 Ω 1 mA 0.01 Ω 0.04 + 5
6 KΩ 1 00 μA 0.0001 KΩ 0.02 + 5
60 KΩ 10 μA 0.001 KΩ 0.02 + 5
600 KΩ 1 μA 0.01 KΩ 0.04 + 5
6 MΩ 200 nA 0.0001 MΩ 0.12 + 3
60 MΩ 200 nA || 10 MΩ 0.001 MΩ 0.85 + 3
100 MΩ 200 nA || 10 MΩ 0.01 MΩ 1.75 + 3
Diode Test
6)
0~2 V 1 mA 0.0001 V 0.05 + 3
2~4 V 1 mA 0.0001 V 0.35 + 3
Continuity Test 2000 Ω 1 mA 0.1 Ω 0.05 + 3
Remarks:
1)
Speci cations are after 0.5 Hour warm-up, “Slow” measurement rate and calibration temperature 18°C ~ 28°C.
2)
10 % over range on all ranges except for DCV 1000 V, ACV 750 V, DCI 10 A and ACI 10 A.
3)
Speci cations are for 4-wire measure or 2-wire measure under “REF” operation. ± 0.2 Ω of extra errors will be generated if perform 2-wire measure without “REF” operation.
4)
Plus 0.02 mV of error per 1 V after the  rst ±500 VDC.
5)
30 seconds OFF after 30 seconds ON is recommend for continuous current that higher than DC 7 A or AC RMS 7 A.
6)
Accuracy speci cations are only for voltage measuring at input terminal. The typical value of current under measure is 1 mA. Voltage drop at diode junction may vary with
current supply. Adjustable voltage range: 0 ~ 4 V.
DC Characteristic Accuracy ± (% of Reading + count)
1)