Datasheet
quantumdata
™
780C
Video Generator /
Protocol Analyzer
for HDMI, HDBaseT & 3G-SDI Testing
Key Features
HDMI, HDBaseT and 3G-SDI input
and output ports for testing both
source display devices as well as
cables and distribution networks
Test Ultra High Definition video
products supporting 4K resolutions
up to 300 MHz
Video pattern and format library with
programmable settings
Protocol tests for digital video
sources and displays
Protocol logging application
auxiliary channel analyzer (ACA)
enables real time monitoring of EDID
exchanges, HDCP transactions,
SCDC transactions and CEC
messages
Passive protocol logging between a
source and a sink is also optionally
supported on HDMI ports
NEW! Report File Creation feature
provides HTML formatted report of
tests performed
The Teledyne LeCroy quantumdata 780C Video Generator / Protocol
Analyzer for HDMI, HDBaseT & 3G-SDI Testing is a portable, handheld
digital video generator and analyzer that enables you to run tests on
various digital video devices and network distribution devices on site or
in the R&D lab. The 780C is equipped with multiple interface types
including HDMI and HDBaseT at 300 MHz pixel rate, 3G-SDI up to 2.97
Gb/s bit rate as well as component analog. Testing digital interfaces is
supported by both an output port and an input port to allow testing of
digital video sources, displays, audio devices and distribution devices.
Diagnose and Troubleshoot
The 780C provide an at-a-glance status
bar on the bottom of the 7” inch touch
screen. The instrument can run quick
video audio and protocol tests on
individual sources, displays, repeaters,
distribution gear as well as cables.
Protocol tests include tests for EDID,
HDCP, infoFrames as well as timing
data. The 780C can also be used for
diagnosing installed digital video
networks. You can place the 780C at
any point in a video distribution network
and run tests upstream toward the
source while emulating a display (or
sink). Or you can run tests downstream
while emulating a source. Generate
reports to demonstrate test series
completion.
Ease of Use
The 780C’s large color touch screen
provides ease of use and quick
status information. The rich set of
routine tests and diagnostic tests are
accessible with just a few touch
clicks. You can quickly configure
settings on the outputs. A rich
command set, available either
through USB or RS-232 serial ports,
supports automated testing.
DRAFT #5
v0128
1-800-909-7211
teledynelecroy.com
©2018 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
SPECIFICATIONS
HDMI
Version
HDMI 2.0a
Standard Formats
VESA (DMT, CVT
-R, CVT), CEA (HDMI / DVI)
Connector
(1) Type A
Tx; (1) Type A Rx
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5
Video
Max Pixel Rate
300MHz (3.00
Gbps/channel TMDS rate)
Color
Depths
8, 10, 12 bits
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Version
1.4
Audio Formats
LPCM, Dolby (DD, DD+,
TrueHD), DTS (ES, HD, Master Audio)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
HDBaseT
Version
HDBaseT 1.0
Standard
Formats
VESA (DMT, CVT
-R, CVT), CEA
Connector
(1) 8P8C (RJ
-45) Tx; (1) RJ-45 Rx
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5
Video
Max Pixel Rate
300MHz
Color
Depths
8, 10, 12 bits
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Version
1.4
Audio Formats
LPCM, Dolby (DD, DD+,
TrueHD), DTS (ES, HD, Master Audio)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
3G
-SDI
Version
– Standards
SMPTE 259M, 344M, 292M, 372M, 424M
Level A (Level B is future)
Connector
BNC 75 ohm
Video Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5
Video Max Bit Rates
SDI: 360Mb/s; HD
-SDI: 1.485Gbps; 3G-SDI: 2.97Gbps
Encoding Bit Depths
10 bits/component
Video Encoding/Sampling
YCbCr
- 4:2:2
Audio Formats / Settings
8
Channel LPCM; Sampling rates (32 – 192 kHz); Bits per sample (16, 20, 24)
Analog Video
Connectors
VGA HD
-15
Format
Standards
VESA,
CEA
Video
Encoding
RGB,
YPbPr
Max Pixel Rate
80MHz (higher resolutions
supported through pixel repetition)
Instrument
AC Adapter
100
-240 VAC, 47-63Hz
Weight
3.25 LBS; 1.47 Kg
Embedded
Display
800 (H); x 480 (V) resolution; 24 bit RGB color.
Size
Height: 2.7 in. (6.98 cm) Width: 9.75 in. (24.76 cm) Depth: 6 in. (15.24 cm)
Command Line
Control
USB Type B, RS
-232
Environmental
Operating Temp: 32 to 104 (F);
0 to 40 (C)
File
Access
USB Type B (command line / file
transfer; SD Card (upgrades / file transfer)
Digital
Audio
Connectors
Optical (JIS FOS);
SPDIF (RCA)
Audio Formats
LPCM, Dolby (DD, DD+), DTS (ES, HD)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
Options
Auto EDID Test
Run automated EDID
test on source devices
Cable Test
Test digital
video cables and video distribution networks
ACA Monitor
Monitor aux channel transactions emulating a source or sink or passively
Report File Creation
NEW!
Provides HTML formatted report of tests performed
Important Note: The model name and description
for this 780 model has been changed to:
“780C Video Generator / Protocol Analyzer for HDMI, HDBaseT & 3G-SDI Testing.”