Datasheet
quantumdata
™
780
Handheld Test Instrument
Key Features
HDMI input and output ports for
testing both source display devices
as well as cables and distribution
networks
Test Ultra High Definition video
products supporting 1080p
resolutions up to 225 MHz
Video pattern and format library
with programmable settings
Protocol tests for digital video
sources and displays, including
test for HDCP authentication
Protocol logging application
auxiliary channel analyzer (ACA)
enables real time monitoring of
EDID exchanges, HDCP
transactions and CEC messages
Passive protocol logging between a
source and a sink is also optionally
supported
NEW! Report File Creation feature
provides html formatted report of
tests performed on a project
The Teledyne LeCroy quantumdata
780 Handheld Test Instrument is a
battery powered portable, handheld digital video generator and
analyzer that enables you to run tests on digital video devices and
network distribution devices on site or in the R&D lab. The HDMI ports
support testing up to 225 MHz pixel rate. Testing these HDMI devices
is supported by both an output port and an input port to allow testing of
HDMI video sources, displays, audio devices and distribution devices.
The 780 also offers a VGA output for testing RGB and component
analog.
Diagnose and Troubleshoot
The 780 model provide an at-a-glance
status bar on the bottom of the 7” in
touch screen. The status bar provides
basic information about what the
instrument is transmitting to a display
and what it is receiving from a source.
The instruments can run quick video
audio and protocol tests on individual
sources, displays , repeaters,
distribution gear as well as cables.
Protocol tests include tests for EDID,
HDCP authentication, infoframes and
timing data. You can place the 780 at
any point in a video distribution network
and run tests upstream toward the
source while emulating a display (or
sink). Or you can run tests downstream
while emulating a source. Generator
reports to demonstrate test series
completion.
Ease of Use
The 780’s color touch screen provides
ease of use. The rich set of routine
tests and diagnostic tests are
accessible with just a few touch
clicks. You can quickly configure
settings on the outputs. A rich
command set, available through the
USB port supports automated testing.
DRAFT #1
v0913
1-800-909-7211
teledynelecroy.com
©2016 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
SPECIFICATIONS
HDMI
Version
HDMI
1.4b
Standard Formats
VESA (DMT, CVT
-R, CVT), CEA
Connector
(1) Type A
Tx; (1) Type A Rx
Protocol
HDMI,
DVI
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5
Video
Max Pixel Rate
225 MHz (2.25
Gbps/channel TMDS rate)
Color
Depths
8, 10, 12 bits
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Versions
1.4
Audio Formats
LPCM, Dolby (DD, DD+,
TrueHD), DTS (ES, HD, Master Audio)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
Analog Video
Connector
VGA HD
-15
Format
Standards
VESA,
CEA
Video
Encoding
RGB,
YPbPr
Max Pixel Rate
80 MHz (higher resolutions
supported through pixel repetition)
Instrument
Battery
6AA
NiMh batteries. 2 hours between charge. Overnight charge required.
AC Adapter
100
-120 VAC, 47-63Hz; 0.4 amps max
Weight
3.25 LBS; 1.47 Kg
Embedded
Display
480 (H); x 272 (V) resolution; 24 bit RGB color.
Tilt
Bail
For convenient viewing
Size
Height: 2.7 in. (6.98 cm) Width: 9.75 in. (24.76 cm) Depth: 6 in. (15.24 cm)
Command Line
Control
USB Type B
Environmental
Operating Temp: 32 to 104 (F);
0 to 40 (C)
File
Access
USB Type B (command line / file
transfer; SD Card (upgrades / file transfer)
Digital Audio
Connectors
Optical (JIS FOS);
SPDIF (RCA)
Audio Formats
LPCM, Dolby (DD, DD+), DTS (ES, HD)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
Options
Cable Test
Test digital
video cables and video distribution networks
Netwrok
Analyzer
Protocol
testing of sources and sinks
ACA
Monitor (emulation) Monitor aux channel and CEC bus while emulating a source or sink device
ACA Monitor (passive)
Monitor
aux channel and CEC bus passively between source and sink devices
Report File Creation
NEW! Provides html formatted report of tests performed on a project