Datasheet
Key Features
Test HDMI and HDBaseT cables,
devices, components and entire
video distribution networks end
to end up to 18G (HDMI).
Verify video and audio
transmission through a video
distribution network.
Verify hot plug, +5V and protocols,
such as HDCP, EDID and NEW!
HDR metadata, through the
distribution network end to end.
Check interoperability between
video sources, displays and
distribution equipment.
Diagnose video and protocol
failures in cables (including NEW!
HDBaseT in Long Reach mode),
video distribution devices and
components.
Simple Pass/Fail test indication
on LCD display offers quick
“Time-to-Insight.”
Test reports provide HTML
formatted reports of tests
performed to demonstrate proper
network turn up.
Battery powered
Handy optional carrying case
available
Diagnose and Troubleshoot
Installing UHD video distribution networks whether in residences or commercial,
industrial or institutional facilities is complex. These installations do not all go well.
A variety of failure conditions can occur such as no video, degraded video, flashing
video, unexpected video, etc. These failures point to a range of underlying
problems.
Whether verifying an HDMI cable or a re-terminated HDBaseT cable run, checking
an HDBaseT extender, testing the EDID handling of an HDMI switch, checking
HDCP content protection protocols or just verifying a video distribution network
end-to-end, this compact, affordable 280 set will save you time on site, reduce
callbacks and provide you with assurance that the video distribution network you
just installed will run problem free.
Ease of Use
The 280 is battery powered with an embedded touch screen. It provides ease of
use and fast Time-to-Insight when testing cables and distribution gear and
checking interoperability between video components and diagnosing failures.
DRAFT #3
v0511
1-800-909-7211
teledynelecroy.com
©2018 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
SPECIFICATIONS
HDMI
Version
HDMI 2.0
Standard Formats
VESA (DMT, CVT
-R, CVT), CEA
Connector
(1) Type A 280G; (1) Type A 280A
Protocol
HDMI,
DVI
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5, BT.2020 (Rx only)
Video
Max Pixel Rate
18G bps data rate; 600 MHz pixel rate (
upscaled from 1080p)
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Versions
1.4 & 2.2
Audio Formats
2Channel LPCM
HDBaseT
Version
HDBaseT 1.0
Standard
Formats
VESA (DMT, CVT
-R, CVT), CEA
Connector
(1) 8P8C (RJ
-45) Tx; (1) RJ-45 Rx
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5
Video
Max Pixel Rate
300
MHz; NEW! Supports Long Reach mode
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Version
s 1.4 & 2.2
Audio Formats
2Channel LPCM
Instrument (each unit)
AC Adapter/Charger
100
-120 VAC, 47-63Hz
Battery
Minimum 4 hours continuous use on 8 hour charge
Micro SD Card Slot
For saving
and retrieving test reports, EDIDs and software upgrade files
LCD
Display
480 (H); x 272 (V) resolution; 4.3” diagonal
Weight (each unit)
0.95 LBS (0.358 Kg)
Size (each
unit)
Height: 7.1 in. (18.04 cm) Width: 7.4 in. (18.79
cm) Depth: 1.25 in. (3.18 cm)
Environmental
Operating Temp: 32 to 104 (F);
0 to 40 (C)
Shortens time on job site.
Reduces callbacks and truck rolls.
Simplifies testing process.
Verifies network components and
design
Tests Supported
280G
Transmitter
- Video Format Test
Select from common standard
CEA and VESA formats
- Video Pattern Test
Select from several test patterns; patterns
above 1080p are up-scaled to 4K
- Hot plug detect
Check
hot plug voltage from connected sink (e.g. UHD TV)
- HDCP active
Verify
HDCP; select version 1.4 or 2.2
- EDID Test
View summary of EDID contents of connected sink or entire downstream network
- HDR Test
Verify
that HDR metatdata is transmitted through the network
- Audio Test
Generate LPCM audio
test tone to check continuity end-to-end
280A Receiver
- Video Format Test
Verify
incoming video timing from a UHD source
- Video Test
View
incoming video on embedded screen; view pixel values up to 150MHz pixel rate
- +5V
Check
+5V from a UHD source
- HDCP Active
Verify
HDCP operation; version 1.4 or 2.2
- EDID Test
Emulate EDIDs to test response
of source or entire upstream network
- HDR Test
NEW!
Verify that HDR metatdata is transmitted through the network
- Link / Cable Test
Test HDMI or HDBaseT cable runs
- Audio Test
Verify LPCM audio end
-to-end
The Teledyne LeCroy quantumdata 280 Test Set is a combination test
instrument set comprised of an HDMI/HDBaseT Video Generator (Tx) and
Analyzer (Rx). Each device is small compact and battery powered. The 280
Test Set is ideally suited for professional A/V integrators and home theatre
installers. This feature-rich test set enables you to conduct basic
verification and diagnostic tests on HDMI/HDBaseT cables, video
distribution networks and individual A/V components. The HDMI input and
output ports support testing up to 18 Gbps data rate and 600 MHz pixel
rate and the HDBaseT input and output ports support testing up to 300
MHz pixel rate (Long Reach mode supported up to 1080p).
The instrument set’s features and convenient operation can shorten time
on the job site and reduce callbacks by enabling you to run basic
verification and diagnostic tests on complex video distribution installations
quickly and efficiently.
This convenient test Instrument set can pay for itself by eliminating
truck rolls and shortening time on the job site.
280G Video Generator
280A Video Analyzer
quantumdata
™
280 Test Set
280G Video Generator
280A Video Analyzer
Portable, Feature Rich & Affordable!
Now verify HDR metadata end to end!
Benefits