User guide

22 920456 Rev B
B0/B1 Measurements 2.2
This test is provided for informational purposes only.
Figure 16 - Oscilloscope Configuration after the B0/B1 Level Test
Shown on the screen:
• F2 and F3 are the selected pulse widths.
Shown in the measurement section:
• P1 and P2 are the calculated the B0 and B1 levels using the conditions in the specification.
Note: The B0 and B1 measurements are used to align the Edge Masks, Eye Mask, and to calculate
the reference levels for Transition time measurements.
Figure 17 - B0/B1 Level Results