Datasheet

WAVELINK DIFFERENTIAL PROBES
www.lecroy.com 243
PROBES AND
PROBE ACCESSORIES
PROBES AND PROBE ACCESSORIES
THREE DIFFERENT TIPS FOR INTERCONNECT FLEXIBILITY
Solder-In Lead
The Solder-In interconnect lead
features the smallest physical tip size
of any high bandwidth differential
probe and the highest level of
electrical performance. Two very
small damping resistors are directly
soldered into the connect points
providing a reliable, intermittent free
electrical connection. The resistors
have highly flexible leads allowing
connection to input points with a
wide range of input spacing.
Quick Connect (D600ST only)
The Quick Connect inter connect
lead enables you to quickly move
the probe between multiple test
points on the test circuit. Just solder
a pair of damping resistors at each
location where interconnection is
required. A small connector mounted
on the probe tip, plugs into the damping
resistors, letting you quickly move
between sets of test points.
Square Pin
Many applications, such as IC
characterization boards, use
standard 0.025" square pins for
interconnect. The Square Pin
interconnect lead directly mates
with a pair of 0.025" (0.635 mm)
square pins which are mounted on
standard 0.100" (2.54 mm) centers.