Datasheet

WAVELINK DIFFERENTIAL PROBES
242 1-800-5-LeCroy
PROBES AND
PROBE ACCESSORIES
FLEXIBLE INTERCONNECTION OPTIONS —WITHOUT SACRIFICING PERFORMANCE
D500PT Positioner Mounted
Probe Tip Module
The probe has a very thin form factor,
allowing multiple probes to be used
when several channels are required
to monitor signals from the same small
IC. It has 2 mm of Z-axis compliance
through spring-loaded telescoping tips,
allowing considerable angular freedom
relative to the circuit board while still
maintaining reliable contact with both
inputs. A ball joint between the tip
and mounting arm makes it even easier
to adjust for placement when already
mounted in a positioner. A small
thumbscrew allows precise and
secure adjustment of the tip spacing.
D600A-AT and D300A-AT
Adjustable Tips
WaveLink adjustable tip probes are
designed to provide an optimum
mechanical connection for signal
measurement.
• Built-in thumbwheel for precise
positioning of tip—stays put
after adjustment
• Maintains sharp points for
good contact
• Tips made of “NiTiNOL,” a super-
elastic nickel-titanium alloy
• Flexes as you apply pressure
• Consistently returns to original form
EZ-Probe Positioner
The EZ-Probe positioner provides
stable, accurate positioning in the
x-y-z axis. Ideal for use with the
D500PT and D600A-AT/D300A-AT
probe tips. The unique, 3:1 motion
reduction joystick allows simple,
precise positioning of the attached
probe in both the horizontal and
vertical measuring plane. The
probe has a fully articulating arm,
providing 30 cm (12") reach in virtually
any direction.
The Probe Tip Modules contain the active amplifier
circuitry. Different modules have different electrical
and physical inter connect characteristics, allowing
the user to select the module appropriate for the
application.