Datasheet

PROBES AND
PROBE ACCESSORIES
PROBES AND PROBE ACCESSORIES
CURRENT PROBES
CP031 – 30A, 100 MHz
The CP031 is LeCroy’s highest bandwidth current probe. Along with the high
100 MHz bandwidth the CP031can probe continuous currents of 30 A
rms
and
peak currents up to 50 A. The CP031 features a small form factor making it
easier to probe on a crowded, compact board.
Features:
• 100 MHz bandwidth
• Small form factor accommodates large conductors with small jaw size
• 30 A
rms
continuous current, 50 A
peak
current
CP030 – 30 A, 50 MHz
The CP030 was designed with a small form factor for today’s crowded boards.
The small jaw can probe currents in tight spaces and still clamp onto conductors
up to 5 mm in diameter. Continuous currents of 30 A rms and peak currents of
50 A can be measured by the CP030, which also features a 50 MHz bandwidth.
Features:
• Small form factor accommodates large conductors with small jaw size
• 30 A
rms
continuous current, 50 MHz bandwidth
• 50 A
peak
current
AP015 – 30 A, 50 MHz
The AP015 current probe can measure continuous current of 30 A rms and peak
pulses of up to 50 A for durations up to 10 seconds. This probe also features
an overheating protection circuit, which will display an on-screen warning to
the user to prevent damage. A probe unlock detection feature is also built in
to the AP015 to ensure accurate measurements.
Features:
• 30 A
rms
continuous current, 50 MHz bandwidth
• 50 A
peak
current for up to 10 seconds
• Overheating and Probe Unlock Detection
CP150 – 150 A, 10 MHz
Features:
• 150 A
rms
continuous current
• 500 A
peak
• 10 MHz bandwidth
CP500 – 500 A, 2 MHz
Features:
• 500 A
rms
continuous current
• 700 A
peak
• 2 MHz bandwidth
CP030
CP031
AP015
CP500
CP150
www.lecroy.com 269