Datasheet

www.lecroy.com 267
PROBES AND
PROBE ACCESSORIES
PROBES AND PROBE ACCESSORIES
HIGH VOLTAGE DIFFERENTIAL PROBES
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
Bandwidth 20 MHz (ADP300)
100 MHz (ADP305)
Differential Voltage 1,400 V peak
Common Mode Voltage 1,000 V rms CAT III
Low-Frequency Accuracy (probe only) 1% of Reading
CMRR 50/60 Hz 80 dB (10,000:1)
100 kHz 50 dB (300:1)
Max. Slew Rate (referenced to input) 60,000 V/µs (ADP300)
300,000 V/µs (ADP305)
AC Noise (referenced to input) 50 mV rms
Attenuation ÷100/÷1000 (automatically selected by scope)
Input Impedance Between inputs 8 MΩ, 6 pF
Each input to ground 4 MΩ, 1 pF
Sensitivity 1 V/div to 350 V/div (ADP300)
200 mV/div to 350 V/div (ADP305)
Interface ProBus, 1 MΩ*
GENERAL CHARACTERISTICS
Overall Length 2 m
Input Connectors 4 mm Shrouded Banana Plug
Operating Temperature 0 ˚C to 50 ˚C
Warranty 1 year
STANDARD ACCESSORIES
ADP305
All ADP300 Accessories
Safety Spade (1 Red, 1 Blue)
Plunger Clamp Clip (1 Red, 1 Blue)
Plunger Jaw Clip (1 Red, 1 Blue)
Safe Alligator Clip (1 Red, 1 Blue)
Soft Accessory Case
ADP300
Instruction Manual
Certification of Calibration
Plunger Hook Clip (1 Red, 1 Blue)
Straps for Holding Probe
*Requires AP-1M for oscilloscopes with 50 Ω only inputs
ORDERING INFORMATION PRODUCT CODE
1,400 V, 100 MHz High-Voltage Differential Probe ADP305
1,400 V, 20 MHz High-Voltage Differential Probe ADP300