Datasheet

PP008-1
PP007-WS-1
PP007-WR-1
PASSIVE PROBES
252 1-800-5-LeCroy
PROBES AND
PROBE ACCESSORIES
The PP007 and PP008 embody leading edge technology in passive probe design.
A rugged, general-purpose probe, its small size is optimized for maximum waveform
fidelity. The small 2.5 mm ground sleeve provides superior visibility, as well as a
greater ability to probe dense circuits than traditional 3.5 mm and 5 mm probes.
Its sharp probe tip* is spring loaded, allowing it to retract into the narrow probe
head. Low input capacitance and low inductance optimize functionality in high
frequency applications. For best performance, the PP007-WR-1 version is designed
to be used with the WaveRunner 6000A Series, while the PP007-WS-1 version is
designed for the WaveSurfer 400 Series. The PP008-1 is designed for use with the
WaveRunner Xi Series.
Features:
• Compact probe head
• Fine pitch SMD probing support
• Rugged, sharp tip
• HF optimized connection accessories
• Over 30 accessories
• Low input capacitance
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
Attenuation ÷ 10
Bandwidth > 500 MHz
Input R 10 MΩ
Input C 9.5 pF
Max. Input 400 V CAT I
Voltage (1250 V surge) 300 V CAT II
GENERAL CHARACTERISTICS
Ground Sleeve Diameter 2.5 mm
Input Pin Diameter 0.5 mm
Cable Length 1.3 m
ORDERING INFORMATION PRODUCT CODE
Basic Adapter Kit PK701
Advanced Adapter Kit PK702
SMD Adapter Kit PK703
Microclip Kit PK704
÷10 HiZ 500 MHz Passive Probe PP008-1
for WaveRunner Xi Series Oscilloscopes
÷10 HiZ 500 MHz Passive Probe PP007-WR-1
for WaveRunner 6000A Series Oscilloscopes
÷10 HiZ 500 MHz Passive Probe PP007-WS-1
for WaveSurfer 400 Series Oscilloscopes
Instruction Manual PP007-OM-E
* A rigid tip is included