User manual

LogicStudio

5
918291RevA
Safety Requirements
Thissymbolmayappearontheproduct: 
Thisrefersyoutoadditional informatio n containedintheoperator’smanual.Thecorrespondinginformationin
thismanualissimilarlydenoted.
Operating Environment
Before using your LeCroy LogicStudio 16, ensure its operating environment will be maintained within
these parameters:
• Indoor use;
• Altitude up to 3000 m;
• Temperature 5
o
C to 50
o
C;
• Maximum relative humidity 90 % for temperatures up to 31
o
C decreasing linearly to 50 %
relative humidity at 50
o
C.
General Safety Summary
Review the following safety precautions to avoid injury and prevent damage to your LeCroy accessory
or any products connected to it.
• Useonlyasintended.Useofthisproductand/ortheequipmentitisconnectedtoinamannerother
thanspecifiedmayimpairtheprotectionmechanisms.
• Connectanddisconnectproperly.Avoiddamagetocablesthruexcessivebending.
• Donotuseinwet/damporexplosiveatmospheres.
•
Do not operate with suspected failures.Do not use this accessory if any part is damaged.All
maintenanceshouldbereferredtoqualifiedservicepersonnel.
• Keepproductsurfacescleananddry.
Cleaning
TheoutsideoftheLogicStudio16hardwa reshouldbecleanedwithasoftclothdampenedwitheitherdeionized
/ distilled water or isopropyl alcohol.Allow the surface to dry completely before returning the instrument to
service.
Use and Maintenance
TheLogicStudio16is ahighquality, precisioninstrument.Tomaintain accuracy andsignalfidelity, mechanical
shock should be avoided, as well as damage to the cables through excessive bending.All maintenance and
componentreplacementshouldbereferredtoqualifiedpersonnel.