Instruction Manual

JTA2 Option
12 ISSUED: December 2003 JTA2-OM-E Rev A
4. Touch a persistence function. The Select Math Operator menu closes, and the trace is
automatically enabled.
JitterTrack
If you want to enable JitterTrack in addition to (or instead of) a persistence function trace, touch
the Jitter button in the Select Math Operator menu, then the Track button. The Select Math
Operator menu closes, and the JitterTrack is automatically enabled.
Jitter Parameters Setup
1. Touch Measure in the menu bar, then Measure Setup... in the drop-down menu.
2. Touch the My Measure button
.
3. In the "Measure" dialog, touch an unused Px button to simply select a jitter parameter
from the Select Measurement menu. Or, touch a Px tab for more setup options.
4. Touch the Jitter button in the Select Measurement menu; a list of persistence functions