Instruction Manual

JTA2-OM-E Rev A ISSUED: December 2003 11
SETTING UP JITTER MEASUREMENTS
Jitter Math Setup
1. Touch Math in the menu bar, then Math Setup... in the drop-down menu.
2. In the "Math" dialog, touch an unused Fx button to simply make a selection from the
Select Math Operator menu. Or, touch an Fx tab
for more setup
options.
Note: By default, unused Fx positions are designated as zooms of C1. However, the traces are disabled, as indicated by
an unchecked On box alongside the Fx button:
3. Touch the Jitter Functions button in the Select Math Operator menu for a list of
persistence functions.