User manual
3. If you select this option, the analyzer uses the stack you defined for every frame. Frames that do use this
stack are decoded incorrectly.
Save the Stack
1. Click the Add To Predefined List button.
2. Give the stack a name, and click Add.
In the future, the stack appears in the Protocol Stack List on the first screen of the Protocol Stack wizard.
Remove a Stack
1. Select it in the first screen and click Remove Selected Item From List.
2. If you remove the stack, you must to recreate it if you need to use it again.
Note: If you do not save your custom stack, it does appear in the predefined list, but applies to
the frames in the current session. However, it is discarded at the end of the session.
4.2.3 Reframing
If you need to change the protocol stack used to interpret a capture file and the framing is different in the new
stack, you need to reframe in order for the protocol decode to be correct. You can also use Reframe to frame
unframed data. The original capture file is not altered during this process.
Note: You cannot reframe from the Capture File Viewer .
To reframe your data, load your capture file, select a protocol stack, and then select Reframe from the File
menu on the Control window. Reframe is only available if the frame recognizer used to capture the data is
different from the current frame recognizer.
In addition to choosing to Reframe, you can also be prompted to Reframe by the Protocol Stack Wizard.
1. Load your capture file by choosing Open from the File menu on the Control window, and select the file
to load.
2. Select the protocol stack by choosing Protocol Stack from the Options menu on the Control window,
select the desired stack and click Finish.
3. If you selected a protocol stack that includes a frame recognizer different from the one used to capture
your data, the Protocol Stack Wizard asks you if you want to reframe your data. Choose Yes.
4. The analyzer adds frame markers to your data, puts the framed data into a new file, and opens the new
file. The original capture file is not altered.
See Unframing on page 39for instructions on removing framing from data.
4.2.4 Unframing
This function removes start-of-frame and end-of-frame markers from your data. The original capture file is not
altered during this process. You cannot unframe from the Capture File Viewer (accessed by selecting Capture File
Chapter 4 Capturing and Analyzing Data TELEDYNE LECROY
Frontline BPA low energy Hardware & Software User Manual 39