User manual

1.
Select Set Initial Decoder Parameters... from the Options menu on the Control window or
the Frame Display window.
2.
Click the Open Template icon in the toolbar and select the
desired template from the pop up list. The system displays the content
of the selected template in the Initial Connections list at the top of the
dialog
3. Click the OK button to apply the selected template and decoders'
settings and exit the Set Initial Decoder Parameters dialog.
3.2.1.2 Adding a New or Saving an Existing Template
Add a Template
A template is a collection of parameters required to completely decode communications between multiple
devices. This procedure adds a template to the system and saves it for later use:
1.
Click the Save button at the top of the Set Initial
Decoder Parameters dialog to display the Template
Manager dialog.
2. Enter a name for the new template and click OK.
The system saves the template and closes the Template
Manager dialog.
3. Click the OK button on the Set Initial Decoder Parameters
window to apply the template and close the dialog.
Save Changes to a Template
This procedure saves changes to parameters in an existing template.
1.
After making changes to parameter settings in a user defined template, click the Save button at the
top of the Set Initial Decoder Parameters window to display the Template Manager dialog.
2. Ensure that the name of the template is listed in the Name to Save Template As text box and click OK.
3. The system displays a dialog asking for confirmation of the change to the existing template. Click the Yes
button.
The system saves the parameter changes to the template and closes the Save As dialog.
4. Click the OK button on the Set Initial Decoder Parameters window to apply the template and close
the window.
Chapter 3 Configuration Settings TELEDYNE LECROY
Frontline BPA low energy Hardware & Software User Manual 23