User manual

For help on setting the parameters, click the Help button on each tab to get help information specific to that
decoder.
If you need to change the parameters later,
l Choose Set Initial Decoder Parameters... from the Options menu on the Control and Frame Display
windows.
Figure 3.8 - Select Set Initial Decoder Parameters... from Control window
The Set Initial Decoder Parameters window opens with a tab for each decoder that requires parameters.
Figure 3.9 - Tabs for each decoder requiring parameters.
l Each entry in the Set Initial Decoder Parameters window takes effect from the beginning of the capture
onward or until redefined in the Set Subsequent Decoder Parameters dialog.
Override Existing Parameters
The Set Subsequent Decoder Parameters dialog allows the user to override an existing parameter at any
frame in the capture where the parameter is used.
If you have a parameter in effect and wish to change that parameter
l Select the frame where the change should take effect
l Select Set Subsequent Decoder Parameters... from the Options menu, and make the needed
changes. You can also right-click on the frame to select the same option.
Chapter 3 Configuration Settings TELEDYNE LECROY
Frontline BPA low energy Hardware & Software User Manual 21