User manual

Figure 7.6 - Example: Side Names Where "Slave" and "Master" are current
1. To open the Side Names dialog, choose Side Names… from the Options menu on the Control
window.
2. To change a name, click on the name given in the Current Names column, and then click again to modify
the name (a slow double-click).
3. Select OK to initiate the changes. The changes that have been made will not fully take effect for any views
already open. Closing and reopening the views will cause the name change to take effect.
4. To restore the default values, click the Set Defaults button.
7.1.4 Timestamping
Timestamping is the process of precise recording in time of packet arrival. Timestamps is an optional parameter in
the Frame Display and Event Display that can assist in troubleshooting a network link.
7.1.4.1 Timestamping Options
The Timestamping Options window allows you to enable or disable timestamping, and change the resolution of
the timestamps for both capture and display purposes.
To open this window:
Choose Set Timestamp Format… from the Options menu on the Frame Display and Event Display window or
click on the Timestamping Option icon in the Event Display toolbar. The Timestamping Options window
will open.
TELEDYNE LECROY Chapter 7 General Information
197 Frontline BPA low energy Hardware & Software User Manual