User manual

Mode Selection Hot key Description
Live &
Capture
File
Event Display
Ctrl-
Shift-E
Opens the Event Display window for analyzing byte level
data.
Frame Display
Ctrl-
Shift-M
Opens the Frame Display window for analyzing protocol
level data
Bluetooth low energy
Timeline
Opens the
Bluetooth low energy Timeline window
for
analyzing protocol level data in a packet chronological
format and in packet throughput graph.
Bluetooth low energy
Packet Error Rate
Statistics
Opens the
Bluetooth
low energy
PER Stats window
to
show a dynamic graphical representation of the error rate for
each low energy channel.
Table 2.3 - Control Window View Menu Selections
Mode Selection
Hot-
key
Description
Capture
File
Notes
Ctrl-
Shift-O
Opens the
Notes window
that allows the user to add
comments to a capture file.
Table 2.4 - Control Window Edit Menu Selections
The Live menu selections will vary depending on the Frontline analyzer in use.
Mode Selection Hot-Key Description
The following two rows apply to all Frontline products except Set in Target.
Live
Start Capture
Shift-F5 Begins data capture from the configured wireless devices.
Stop Capture
F10 Stops data capture from the configured wireless devices.
The following rows apply to all Frontline products
Live Clear Shift-
F10
Clears or saves the capture file.
Table 2.5 - Control Window Live Menu Selections
TELEDYNE LECROY Chapter 2 Getting Started
10 Frontline BPA low energy Hardware & Software User Manual