User manual

Figure 4.110 - Data/Audio Extraction Settings dialog
2. Choose a checkbox(es) on the left side of the dialog to identify from which profile(s) you want to extract
data.
It's important to note that if there is no data for the profile(s) you select, no extracted file is created.
3. If you want the file(s) to open automatically after they are extracted, select the Open File(s) After
Extraction checkbox.
Note: This does not work for SCO/eSCO.
4. Click on a radio button to write the streams as Two Mono Files or as One Stereo File.
Note: This option is for SCO/eSCO only.
5. Select the checkbox if you want to convert A-Law and µ-law to Linear PCM.
CVSD are always converted to Linear PCM. It's probably a good idea to convert to Linear PCM since more
media players accept this format.
Note: This option is for SCO/eSCO only.
6. Select the Add Silence packets to insert the silence packets (dummy packets) for the reserved empty
slots into the extracted file. If this option is not selected, the audio packets are extracted without inserting
the silence packets for the reserved empty slots.
Note: This option is for SCO/eSCO only.
TELEDYNE LECROY Chapter 4 Capturing and Analyzing Data
156 Frontline BPA low energy Hardware & Software User Manual