Data Sheet

TeledyneLeCroyCorporation MercuryT2C
90 USBProtocolSuiteUserManual
2.6 Mercury T2C
TheLeCroyUSBMercuryT2C™USB2.0andPowerDeliveryProtocolAnalyzerisa
verificationsystemforUSBdevelopmentandtesting.ItsupportsUSB2.0.Itisdesignedto
recordUSBtrafficandgraphicallypresentthelogicaltransactionsandevents.Itconnects
toalaptopordesktophostmachineviaUSB2.0.TheMercuryT2CispoweredbytheUSB
Type‐Ccable,sonoadditionalpowercordisneeded.
2.6.1 Components
TheTeledyneLeCroyMercuryT2CAnalyzerpackageincludesthefollowing:
 OneTeledyneLeCroyUSBMercuryT2CAnalyzer
 SixUSBcables:2xA‐C,C‐B,C‐uB,C‐C,C‐AReceptacle
 InstallationDVD‐ROM,includingdocumentation
 QuickStartGuide
2.6.2 Front Panel
Figure 2.15: Mercury T2C Front Panel
The front panel has the following indicators and connectors:
Connector 1 LED (Green - Good)
(Red - Flip it over!)
Analyzer Connector 1 (downstream) Connects to Device under test (UFP).
Power LED (Green if on)
Status LED (Blue if system successfully initializes)
(Red while booting. If red for more than a minute, hardware failure)
(Green while initializing)
Analyzer LEDs
Trig- Trigger (Green if triggering)
Rec- Recording (Red if recording enabled)
Analyzer Connector 2 (upstream) Connects to Host under test (DFP).
Connector 2 LED (Green - Good)
(Red - Flip it over!)