Data Sheet

TeledyneLeCroyCorporation ApplicationStartup
148 USBProtocolSuiteUserManual
3.5.2 Analyzer Devices
ToshowtheavailableAnalyzerDevices,selectSetup>AllConnectedDevicestodisplay
theAnalyzerDevicesdialog.
ThedialogdisplaystheDevice,Location,andStatus.
Youcanclick:
 Abouttodisplaydeviceinformation(see“Software,Firmware,andBusEngine
Revisions”onpage 609).
 UpdateDevice(see“ManualUpdatestoFirmware,BusEngine,and
Serdes BusEngine”onpage 614)
 UpdateLicense(see“UpdatingtheSoftwareLicense”onpage 616)
 ConnecttodisplaytheConnectionPropertiesdialog,inwhichyoucansetthe
systemto:
 Automaticallyconnecttothedevice.
 Asktoconnecttothedevice.
 Takenoaction.
 AddDevicetodisplaytheAddEthernetAttachedDevicedialog,inwhichyoucan
enteranIPAddress.
 IPSettingstouseaDHCPorStaticIPaddress.
Torefreshthelistofdevices,clickRefreshDeviceList.
Beforestartingrecording,selecttheAnalyzeryouwanttouseforrecording.