Users Manual Instruction Manual

7
CATC FIREINSPECTOR 2.01 CHAPTER 1
User’s Manual FireInspector Overview
1.5 Specifications
Package
Dimensions: 10.5 x 10.4 x 2.4 inches
(26.7 x 26.5 x 6 centimeters)
Connectors: one USB (type “B”)
three 1394 (6-pin)
Weight: 3.5 pounds
(1.6 kilograms)
Power Requirements
90-264VAC, 47-63Hz (universal input), 100W maximum
Environmental Conditions
Operating Range: 0 to 55 °C (32 to 131 °F)
Storage Range: -20 to 80 °C (-4 to 176 °F)
Humidity: 10 to 90%, non-condensing
LEDs
Power (PWR): illuminates when the analyzer is powered on
Triggered (TRG): illuminates when the analyzer has detected a valid trigger condition
Recording (REC): illuminates when the analyzer is actively recording traffic data
Recording Memory Size
64 MB DRAM for traffic data capture
64 MB DRAM for timing, state & other data
Certification
FCC (Class A), CE Mark, UL, CSA
Basic Events Detected
FireInpector detects the following basic events:
• Bus conditions: bus reset, arbitration reset gap, subaction gap, and packet speed
• PHY packets
22 GND Signal Ground
23 GND Signal Ground
Table 1-2: External Interface Breakout Board – Pin Description
Pin Signal Description