Users Manual Instruction Manual

123
CATC FIREINSPECTOR 2.01 CHAPTER 9
User’s Manual Reports
Parameters for the chosen group will appear to the right of the list when you
click on an event group name. If a parameter is grayed out, that means that it
isn't visible or doesn't occur in the active Trace file.
Step 4 Select the parameter(s) that you want to find in the Trace.
When parameters are set for a selected event group, a check mark will appear
in the checkbox next to the event group's name in the Event Groups list.
Step 5 (Optional) Repeat Steps 3 and 4 until the event groups and parameters are set
to your liking.
Step 6 Select a combination definition in the section marked Combining Specified
Event Groups:
• Union - Packets that match ANY of the specified events: Selecting this
serves as the logical OR for the selected event groups.
• Intersection - Packets that match ALL of the specified events: Selecting
this serves as the logical AND for the selected events.
• Exclusion - Packets that DO NOT match (opposite to the intersection or
union): Selecting this finds all the packets that DO NOT match the
specified search criteria. It must be used in conjunction with either the
Union or Intersection option.
Step 7 Click OK to use the definitions.
Figure 9-9: Define Packets to Hide dialog