Datasheet
© 2017 Teledyne LeCroy, Inc. All rights reserved. Specications, prices, availability, and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
Local sales oces are located throughout the world.
Visit our website to nd the most convenient location.
1-800-5-LeCroy
teledynelecroy.com
Product Description Product Code
Deskew Calibration Source DCS025
Customer Service
Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience
difculties, our digital oscilloscopes are fully warranted for three years and our probes are warranted for one year. This warranty includes:
•
No charge for return shipping
•
Long-term 7-year support
•
Upgrade to latest software at no charge
Specications
Electrical Characteristics
Signal Fall Time (80-20%) 10 ns
Static Skew Between Inputs
<2 ns (guaranteed)
<1 ns (typical)
Environmental
Operating Temperature Range 0 to 50 ºC
Non-operating Temperature Range -40 to +70 ºC
Humidity 5% to 95% RH (10 to 40 ºC);
5% to 75% (above 40 ºC);
RH not controlled below 10 ºC
Operating Altitude 3000 meters maximum
Physical
Dimensions (WxHxD) 46 mm x 24 mm x 108 mm
(1.81” x 0.95” x 4.25”)
Weight 119 g (0.26 lb)
Ordering Information
dcs025-ds-25jul17
CP030 30A current probe and HVD3106 high voltage differential probe
connected to an HDO6104A-MS 12-bit resolution high denition oscillo-
scope. The DCS025 is connected to the EXT input (to conserve analog
channels) and the deskew amount is adjusted for one of the probes in
the channel dialog menu.
CP150 150A current probe and HVD3106 high voltage differential
probe connected to an HDO6104A-MS 12-bit resolution high denition
oscilloscope. The DCS025 is connected to the EXT input (to conserve
analog channels) and the deskew amount is adjusted for one of the
probes in the channel dialog menu. In this case, a vertical Zoom of the
current signal is used for deskewing.
Compatibility
The DCS025 requires the Teledyne LeCroy oscilloscope to be running
rmware version 8.4.1.4 or greater in order to utilize the automated
triggering setup. Otherwise, the DCS025 is compatible with any ProBus
compatible Teledyne LeCroy oscilloscope