Instruction Manual

6
SPECIFICATIONS
Bus
CPCI-H110
, CompactPCI H110, 5V or 3.3V
Extender
Voltage Requirements:
+5V, +12V & -12V @ 50 mA at no load.
UUT
Input Voltage Source:
+
5V, +/-12 V From the system bus or the external input, configurable by jumpers per
voltage.
+3.3V From the system bus, on board regulator, or the external input, configurable
by jumper.
Output Ratings:
+5V Jumper selectable to 10 Amp or 2 Amp limit.
+3.3V 3.0 Amp using on board regulator, or 8A using external input voltage and bus
voltage.
+/- 12V 1 Amp.
Output Voltage Drop:
50 mV drop for every 1 Amp drawn for +5V, +3.3V and +VIO.
80 mV drop for every 100 mA drawn for -12V.
50 mV drop for every 100 mA drawn for +12V.
Outputs:
J3.1 Ground
J3.2 +5V current measurement, One Volt represents one Amp.
J3.3 +12V current measurement, One Volt represents one Amp.
J3.4 +3.3V current measurement, One Volt represents one Amp.
JT1, JT2 All CompactPCI H110 signals.
JT3, JT4 Breakout points for monitoring CompactPCI Signals
Mechanical Dimensions
:
Height 8.00 inches (203 mm)
Length 9.186 inches (233.32 mm)