Users Manual User Manual

Protocol Analysis
79
Reduced Bit Width
Full/Low Speed Mode Only
The reduced bit width feature is available for the Full/Low speed mode only.
Adjustable bit width of 40, 60, 80, and 100% is allowed for all packet fields,
except data, for Device response testing. You can reduce bit width for all bits
in a packet or individual bits in a packet.
To set the Bit Width
Right-click in a packet field and choose Bit W
idth to open the Set Bit Width
dialog.
Figure 54 Set Bit Width Dialog
Select a field for bit width reduction, choose a percentage bit width reduction
for either all of the bits in the field or each bit individually, and click OK.