Users Manual User Manual

Protocol Analysis
47
Programming the Exerciser in Easy Mode
Click the Exerciser Program tab to open the Exerciser Programming dialog
box as shown in Figure 25.
Figure 25 Exerciser Easy Mode Programming Dialog Box
Set up the Device
You must use Find Device first to enumerate the device automatically. After
enumeration is complete, the system sends SOF or Keep Alive packets to
prevent the device for entering a suspended state.
Click F
ind Dev. to command the system to identify the USB
Device connected automatically.
Verify that the USB Device is powered up and operational by noting the
display of Detecting First Device ..., followed by Devices that Conquest
detects connected to the Main Analyzer USB port.