Users Manual User Manual

Launching the USB Analyzer

If Conquest is not detected, the software displays the Hardware Not

Detected message.

Multiple Analyzers

If you have multiple Analyzers installed, you get the following message. In

such cases choose the Analyzer and click Attach.

Connecting via Ethernet

You can use the ethernet connection using any one of the following three

supported configurations:

1. Conquest connected to a network via a hub, switch, or similar device.

2. Conquest connected to the host computer (machine running the

application software), via a hub, switch or similar device.

3. Conquest connected directly to the host computer using a crossover

cable.