Users Manual User Manual

Conquest Versions
2
Conquest M2 (SBAE30) and Conquest Supported Features
Feature
Conquest M2
Standard Advanced Pro Pro Exerciser
Low Speed (1.5 Mb/s) and Full Speed (12 Mb/s) ++++
High Speed (480 Mb/s) ++++
Trace Memory Size 128 MB 128 MB 394 MB 394 MB
Upload to Host via USB 2.0 or LAN ++++
Global & Raw Bit View ++++
View Hex, Decimal or Binary ++++
Search on Errors ++++
Search within Data Payload ++++
Export Text / ASCII / Binary ++++
Snapshot Capture ++++
Data Report ++++
Upper-level USB Device Class Decodes ++++
User-defined Decodes ++++
Single-level Event Triggering (Easy mode) ++++
Trigger on Protocol Errors ++++
Trigger on Setup / In / Out / Data / Ping ++++
Statistical Reports +++
Multi-level Event Triggering (Advanced mode) +++
Trigger on Split Setup Transaction +++
Trigger on Split Bulk In/Out Transaction +++
Trigger on Split Interrupt In/Out Transaction +++
Trigger on Split Isoch In/Out Transaction +++
Filter In / Out specific Address / Endpoints +++
Trigger on Data Pattern and Length ++
Trigger on Vbus & Operating Current ++
Event Counters ++
Event Timers ++
Auto Run (multiple trace capture) ++
Auto detect Speed ++
Slow-clock Capability ++
Performance Analyzer (Easy \ Advanced Option) ++
OTG Analysis ++
Timing Analysis Display ++
DC Compliance measurement ++
Find Device (View Scan descriptor) +
Exerciser Graphical User Interface (GUI) +
Traffic Generation / Host emulation +
Simultaneous Transmit and Record +
Device emulation +
OTG Device Emulation +