Users Manual Instruction Manual

76
CATC BTTRAINER 2.20 APPENDIX A
User’s Manual
A.1.20 Set_Connection_Encryption
Set_Connection_Encryption is used to enable and disable the link-level encryption.
A.2 HCI Link Policy Commands
A.2.1 Get_Park_Mode
Stops park mode and enters active mode for the specified ACL link.
A.2.2 Exit_Sniff_Mode
Stops Sniff mode and enters active mode for the specified ACL link.
A.2.3 Hold_Mode
Places the specified ACL link into Hold Mode.
Command Parameters Examples Comments
HCI_Handle 0x0001
Encryption_Enable 1 Range: 0 or 1
Return Events
Set_Connection_Encryption_Complete
Set_Connection_Encryption_Error
Command Parameters Examples Comments
HCI_Handle 0x0001
Return Events
Mode_Change
Exit_Park_Mode_Error
Command Parameters Examples Comments
HCI_Handle 0x0001
Return Events
Mode_Change
Exit_Sniff_Mode_Error
Command Parameters Examples Comments
HCI_Handle 0x0001