Users Manual Instruction Manual

73
CATC BTTRAINER 2.20 APPENDIX A
User’s Manual
A.1.13 PIN_Code_Request_Negative_Reply
PIN_Code_Request_Negative_Reply is used to reply to a PIN Code Request event from the
Host Controller when the Host cannot specify a PIN code to use for a connection. This
command should be executed before PIN_Code_Request event is received. By default, the
PIN_Code_Request event is rejected.
A.1.14 PIN_Code_Request_Reply
PIN_Code_Request_Reply is used to reply to a PIN Code Request event from the Host
Controller and specifies the PIN code to use for a connection. This command should be
executed before Pin_Code Request event is received. By default, the Pin_Code Request
event is rejected.
Inquiry Length 8 Range: 0x01 – 0x30
Num of Responses 10 Range: 0-255 (0=Unlimited
number of responses)
Return Events
Periodic_Inquiry_Mode_Complete
Periodic_Inquiry_Mode_Error
Command Parameters Examples Comments
BD_ADDR 0x010203040506
Return Events
Command_Complete
Command Parameters Examples Comments
PIN_Code (binary or ASCII) 1234 PIN_Code is a string character
that can be up to 128 bits in
length
BD_ADDR 0x010203040506
Return Events
Command_Complete
Command Parameters Examples Comments