Users Manual Instruction Manual

69
CATC BTTRAINER 2.20 APPENDIX A
User’s Manual
APPENDIX A: COMMAND GENERATOR
C
OMMAND DESCRIPTIONS
Note: “N/A” means Not Applicable. This indicates that the specified command does not have a parameter.
A.1 HCI Link Control Commands
A.1.1 Accept_Connection_Request
Used to accept a new incoming connection request. Execute this command before
connection request from another device. By default, all connection requests are accepted.
A.1.2 Add_SCO_Connection
Will cause the link manager to create an SCO connection in addition to the existing ACL
connection.
A.1.3 Authentication_Requested
Used to initiate authentication between the two devices associated with the specified
HCI_Handle.
Command Parameters Examples Comments
N/A
Return Events
Accept_Connection_Request_Complete
Command Parameters Examples Comments
HCI_Handle 0x0001
Packet Type 0x0080 Possible packet types:
HV1=0x0020
HV2=0x0040
HV3=0x0080
Return Events
Add_SCO_Connection_Complete
Add_SCO_Connection_Error
Command Parameters Examples Comments
HCI_Handle 0x0001