Users Manual Instruction Manual

CATC BTTRAINER 2.20 CHAPTER 4

User’s Manual Profile Wizard

Step 4 At this point, you may transfer files to the root folder from the remote device.

4.3.4 Emulate Device: HCRP Server

This section explains how to use Profile Wizard to set up BTTrainer to emulate an HCRP

server.

Step 1 Complete Steps 1-4 in Section 4.3, “Emulating Devices” on page 32.

The Printer Emulation screen will open.

Step 2 You can now do any of the following:

• Change the folder in which transferred files are stored: Click the

Change... button to open the Browse for Folder dialog. Select the folder

in which you want transferred files to be stored. Click OK to confirm the

change.

• Change the maximum size for data credits: Click the Change maximum

size... button to open the Change Data Credit Maximum Size dialog. Type

in a new credit size, in bytes. Click OK to confirm the change.

• Set the LPT status bits: Check or uncheck the status bits to change their

settings.

Paper empty: Checked = 1 = Paper empty; Unchecked = 0 = Paper not

empty

Selected: Checked = 1 = Selected; Unchecked = 0 = Not selected

Error: Checked = 0 = Error; Unchecked = 1 = No error

• Change or add a printer ID string: Click Change printer ID string... to

open the Change Printer ID String dialog. Enter strings as KEY:VALUE

pairs or vendor-specific pairs. Individual strings must be separated by

semicolons. Click OK to confirm changes.

• Send a file to the printer: Click the Print... button to access the Open

dialog. By default, the file that was most recently transferred to the HCRP

server will be selected; however, you may browse to a different file, if you

wish. Click Open to print the file.

4.3.5 Emulate Device: Headset

BTTrainer can be configured to emulate a wireless device that conforms to the Bluetooth

Headset profile. The following steps show how to set up BTTrainer as a Headset device and

connect to it with a remote Bluetooth headset.

Step 1 Complete Steps 1-4 in Section 4.3, “Emulating Devices” on page 32.

The Headset Emulation screen will open, indicating that BTTrainer has been

configured to emulate a device that supports the Headset profile and is

awaiting connection from a device.