Users Manual Instruction Manual

280
CATC BTTRAINER 2.11 CHAPTER
User’s Manual
Used in Test Cases
Example
• Address = ‘010203040506’;
• TestScenario = 1;
• NumberOfTimes = 100;
• result = HCICatcPage(Address,TestScenario, NumberOfTimes);
• Trace(result);
HCICatcPageScan
HCICatcPageScan(TestScenario, nPage)
Test Scenario values
Return value
• "Success"
•"Failure"
• "Invalid Parameter"
Test Case Description
TP/PHYS/PAG/BV-10-C Page response 1/1 slot/79 channel.
TP/PHYS/PAG/BV-12-C Page response 1/2 slot/79 channel
TP/PHYS/PAG/BV-14-C Page scan interval R0.
TP/PHYS/PAG/BV-16-C Page scan interval R1.
TP/PHYS/PAG/BV-18-C Page scan interval R2.
Parameter Meaning Default Value Comments
TestScenario See table below
Npage Specifies Npage of the paging
device
0x00 Return to use the normal Page Scan
0x01 Disable responding to incoming page ID packets according to the
TP/PHYS/PAG/BV-01-C test cases
0x02 Respond to the first ID packet and the second received FHS packet from the Paging
device according to TP/PHYS/PAG/BV-03-C test
0x03 Respond to the second ID packet and the second received FHS packet from the Paging
device according to TP/PHYS/PAG/BV-05-C test cases
0x04-0xFF Reserved