Users Manual Instruction Manual

269
CATC BTTRAINER 2.11 CHAPTER
User’s Manual
Example
SDPResetDatabase();
B.11 TCI Commands
HCICatcAcceptConnectionExt
HCICatcAcceptConnectionExt(TestScenario, PacketType,
NumberOfPackets, Data, ErrorType, ErrorMask, Tx Jitter)
Comments
This command supports TCI functionality that requires BTTrainer to be
connected as a slave device. The command will accept an incoming con-
nection request from the master, and configure BTTrainer to perform the
specified test.
This command can be executed several times outside the connection con-
text to modify testing conditions.
Parameter Meaning Default Value Comments
TestScenario Values:
0 - Comply with the regular Bluetooth connec-
tion
1- Send packets in every slave Tx slot
PacketType Values defined for HCI_CreateConnection com-
mand
NumberOfPackets Values: 0x0001 -- 0xFFFF
Data
ErrorType See the table below