Users Manual Instruction Manual

219
CATC BTTRAINER 2.11 CHAPTER
User’s Manual
Example
result = OBEXClientConnect(Devices[0]);
if(result != "Success")
{
MessageBox("Failed to establish OBEX connection.");
}
OBEXClientDeinit
OBEXClientDeinit()
Return value
• “Failure”
Comments
This command is obsolete. It is provided for backward compatibility only.
(The application is initialized as an OBEX client at startup and cannot be
deinitialized.)
Example
result = OBEXClientDeinit();
OBEXClientDisconnect
OBEXClientDisconnect()
Return value
• “Success”
• “Failure”
• “Failed: Busy”
• “Failed: Not connected”
• “Failed: Packet too small”
Comments
Breaks the current OBEX client connection.
Parameter Meaning Default Value Comments
N/A
Parameter Meaning Default Value Comments
N/A